Home > Products > Security & Protection > Surveillance Equipment

Detailed Product Description
Set up the cameraThe camera can use one piece 3.6V Li battery or power adapter supply power (power
adapter it is rechargeable to the Li battery, there have build in charging circuits
in camera and monitor)
1. Supply power by batteryOpen the battery compartment cover on the rear of cameraInsert the Li battery follow the plus+ and minus-, then close the batter cover.Press the power switch, the power indicate light on, put the channel set up on channel
which need working(often have four channel)
Please close let power off when not use the camera2. Supply power by power adapterPlug one end of power adapter to the wall outlet and the other end into the plug
of camera
Press the power switch, the power indicate light on (when supply power by AC adapter,
if the battery haven't enough power then AC adapter can charge the battery
automatically and the power indicate light on, when full charge the recharge
power indicate light off(can recharge and working meanwhile))3. Night vision:The infra red light don't turn on at day, when at night or unlit condition the red
light turn on automatically, when the light dark into some content the image display
Black/white
Set up the monitor The monitor can use one piece 3.6V Li Battery or AC power adapters (the power adapter
are recharge to the battery by as the monitor build in rechargeable circuits)
1. Supply power by BatteryOpen the battery compartment cover on the rear of cameraIntsert the li battery follow the plus+ and plus-, then close the batter cover.Press the power switch, the power indicate light on, put the channel set up channel
which need working (often have four channel)when observe the image by LCD you
can through the A/V output and connect with AV input of TV or VCR monitor
observe meanwhile.2. Place the voice control button to advisable location under normal working situation,
when the camera voice image sensor cann't detect the voice or it is very
feeble, monitor LCD turn off after ten mintues, meanwhile don't affect the TV or
VCR working, however, once have enough voice the LCD turn on automatically at once.
3. Supply power by AC adapter Plug the AV power adapter to the DC input of the monitor, if the battery haven't
enough power then the charge indicate light on, after charge full, the indicate
light turn off automatically.
Press the power button, and other function same as supply power by battery (can
charge over observing)