Home > Products > Industrial Supplies > Machinery > Welding Machinery

It's mainly used for cutting any plane geometric figures on non-ferrous metal of carbon steel plate, stainless steel plate and etc.

Control System

Hardware ：

　　LEO8000S industrial computer /industrial main board made in Taiwan is used, and with special anti-seismic design, Celeron 433MHz, 64M of internal memory, 40G of hard disk, 1.44M of floppy drive and. The power supply is 220V, 50Hz.

●  Imported industrial control computer is adopted.
●  Intel Pentium series
●  64M of internal memory
●  40G of hard disk
●  3.5 inches of floppy drive
● RS232 COM
●  Touch type “three-proof” thin film keyboard
● 14 inches of CRT color monitor
●  Menu
●  Power required: 380V+10% ， 50HZ
● 24 hours 3-shift continuous operation may be guaranteed reliably.

Functions of control software

● Automatic cutting of the whole procedure
● Synchronous cutting tracking display and dynamic tracking during the procedure of machining
● Acceleration and deceleration function during the procedure of cutting
● Automatic compensation of seam during the whole cutting procedure is realized.
● Torch return and re-return function along the original track
● Function for torch moving out of the cutting point for adjustment of the torch to make it in a good state
● Code: SK88 special language, international standard G-Code.
● Automatic edition error alarm function
● Programming on line

Mechanical System

● Gantry: Box type structure with high strength and rigid design
● Main sliding seat and auxiliary sliding seat: a pair
● Main gearbox and auxiliary gearbox: a pair
● Main and auxiliary tracks and rack: Railway tracks are adopted after planning, milling and grinding.
● Main cutting device: Including double guide columns up-and-down mechanism, which is smooth in operation and possesses mechanical limit function.
● Gas line and cables are adopted with chain type structure, and adjusted brackets for supporting tracks are available..

Driving System

● Driving cabinet assembly
● Special master line board
● Input and output photoelectric isolation board
● Function board of cutting device
● Step-by-step motor drive unit (2 pcs.): It can realize 5 or 10 fine steps of step-by-step motor, it possesses a high reliability.
● Motor: Micro step-by-step motor made in China-America joint venture enterprise

Gas Line System

● Hose
● Electromagnetic valves
● Igniter
● Flashback arrester
● Torches and tips