Home > Products > Industrial Supplies > Rubber & Plastics Machine

      XGNB series of plastic pipe bursting pressure are adopted from the testing machine design and manufacture similar products in the advanced technology and components, software interface more suitable conditions, with high performance and low cost. It not only replace imported materials, but also provide the advanced international level testing equipment for the chemical testing at all levels of our industry and plastic pipe production plant in China. The products comply with standards (ISO1167, GB6111, GB/T15560, ASTM D1598.ISO9080 GB18252.CJ/T108-1999 and ASTM F1335), which regarding the testing method of the plastic pipe and composite pipe in bursting transient voltage test and the standard test methods. It applies to PVC, PE, PP, PEX, such as ABS composite pipe and the static pressure test.
Specifications:(Max pressure)): 3、6、10、16MPa
Constant pressure error): ±1%、
Timing range):   1s~9999Hour 59Min59S

1．Working pressure: 0-10MPa

2. Testing station: 3 stations

3．Pressure control accuracy: +/-1%(Maximum+/-0.001 MPa)

4. The pressure value resolution: 0.001 MPa

5. Constant temperature water rtough temperature range: mormal temperature-95℃

6． Temperature uniformity: ≤±1℃

7． Timer display accuracy: 1s

8． Without the computer, the data can be saved for 8760 hours.

9．The control parameters(pressure time, accuracy)can be input from the micro-control unit at the testing machine or from computer.

10. Power supply: three phases, suitable for both 380VAC and 220VAC.

11．The machine and the computer can separately or simultaneously display the time (Max.9999hours 59 minutes 59 seconds)and the pressure(three figures after the point)and eight testing condition(Pressure up, pressure down ,pressure compensate, running, end, leakage and exploding ).When the pressure overload, end, leakage and explode take place simultaneously, there is light and voice alarm.

12.The machine has the following function : observe, analysis, inquire, save, print, testing curve(pressure-time)and starting time, setting time, current time, valid time, invalid time, remaining time, over pressure time, pressure compensating time and etc