Home > Products > Electronics & Electricity > Insulation Material

Glass Textile Sleeving With Acrylic Based Coating 2740-2 1
  • Glass Textile Sleeving With Acrylic Based Coating 2740-2 1

Glass Textile Sleeving With Acrylic Based Coating 2740-2

Origin:Made In China
Category:Electronics & Electricity / Insulation Material
Label:Acrylic sleeving , Fiberglass , Insulating sleeving
Price: -
Min. Order:-
Inquire Now Add to Basket

Company Information


Product Description

   2740-2Fiberglass sleeving coated with acrylic resin is manufactured with E-fiberglass braided sleeving and coated with a layer of acrylic resin,and then thermoset to form F grade insulating sleeving.It possesses reliable heat resistance,good qualities of dielectric,fair softness,and elasticity,benzene resistance and oil resistance.It can be used for wiring insulation and mechanic protection for electrical instruments,wireless sets and domestic electrical appliances.

Bore Diameter Wall Thickness
Nominal Tolerance(±) Minimum Maximum
0.3、0.5、0.8 ±0.10 0.20 0.50
1.0、1.5 ±0.15 0.20 0.75
2.0、2.5 ±0.20 0.20 0.75
3.0 ±0.25 0.20 0.75
3.5、4.0、5.0、6.0 ±0.25 0.30 0.75
7.0、8.0 ±0.50 0.30 0.75
9.0、10.0、12.0、14.0、16.0、18.0、20.0 ±0.50 0.40 0.90
23.0、25.0、27.0、30.0 ±0.50 0.40 1.00
Performance Requirements
Breakdo wn Voltage(KV) Median Median Minimum value
under normal(23±2℃) ≥4.0 ≥2.5
High temperature(155±2℃) ≥2.0 ≥1.5
Moist heat treatment ≥1.5 ≥1.2
Resistance to soldering heat To maintain the temperature of the solder at 260 ° C ± 5 ° C, the middle of the hose vertical section of the lower end of 6mm immersed in the molten solder bath, tinned copper maintained in the molten solder bath 15s ± 1s. Hose shall not crack or obvious swelling.
Bending resistance after heating Temperature: 180 ° C ± 3 ° C, processing time 48h ± 1h, hose wrapped around the mandrel, the film should not be disengaged or cracking the glass tube.
Bending low temperatures Temperature: ≤ -15 ℃, the processing time of 60min ± 10min, the outside of the paint film should glass tube disengaged or cracking.
Coating hydrolytic Temperature: 100 ° C ± 2 ° C, the processing time of 72h, uncoated flow between the paint tube and aluminum adhesions, the performance and no discoloration, the coating does not melt.
Temperature index 155 ℃
Standard Met:JB/T 8151.3―1999

Product Image

Glass Textile Sleeving With Acrylic Based Coating 2740-2 1
Img 1

Send Inquiry to this Company


No.11Wenjun Road,XingFu District Industrial Park ,GangZha district,NanTong City,JangSu Province

zhang feng (GENERAL MANAGER)

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Insulation Material Made In China Products


Insulation Material China Suppliers and China Manufacturers