Product Description
We can supply PTFE rod sheet tape.
Product Name:PTFE rod
Place of Origin:China
1)Features:
There are three kinds of PTFE rods to offer.One is manufactured by paste extruding method in the diameter from 2 to 4mm and the other is made by ram extruding method in the diameter from 5 to 120mm;rods over the diameter 55to 300mm are manufactured by moulding.
PTFE is the most chemical-resistant and the best dielectric of all known plastics.It is not aging and binding.It can be used from - 180 ℃- +260 ℃ under no burthen circumstances. PTFE has the lowest coefficient of friction of all known solid materials.
2)SPEC:
a)Pressed rod:
Diameter(mm):2,3,4
Length(mm):produced under requirements.
b)Extruded rod:
Diameter(mm):5--120
Length(mm):500--3000
c)Die pressed rod:
Diameter(mm):55--300
Length(mm):100--300
3)Applications:
Electrical insulation,seal,anti-sticking materials.
Product Name:PTFE sheet
1)Features:
PTFE molded sheet is manufactured b molding method with PTFE granular resin.
PTFE possesses the best chemical resistance of all known plastics . It dows not age . It has the lowest coefficient of friction of all solid materials and a wide range of practicable temperature from -180 to+260centigrade.
2)SPEC:
Length(mm)xWidth(mm):150x150,250x250,300x300,450x450,600x600,800x800,1000x1000,1200x1200,1000x2000
Thickness(mm):
3)Main Porperties:
Apparent density:2.10-2.30g/cm3
Tensile Strength(min) more than 15.0Mpa
Crack elongation(min) more than 150%
Dielectric strength(min) more than 10Kv/mm
4)Applications:
Lining Bearing pads,seals,and electrical insulation.
Product Image
Send Inquiry to this Member
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,