Home > Products > Services > Trade Agent > Electronics Agents

WSD81PU power unit, WSP80 soldering pencil, and WPH81 stand and sponge
Software has been upgraded to allow the power unit to cycle faster
A standard setback feature has been added to save tip life and power
80-watts of controlled power to work on high-mass components and boards
Fast recovery and minimal temperature loss when making fast connections
Programmable using the optional WCB1 control module
UL and cUL listed
ESD safe to protect sensitive components
Uses economical LT series tips which are now tinned

This Station increases the ability to work on high-mass components where a greater controlled power is required.  A silver heating element along with low mass solder tips allow for faster recovery time than conventional irons and tips.  Features push-button temperature control from 150° F to 850° F. LED readout displays temperature settings and tip temperature.

Soldering station digital 80 W, 230 V, with WSP 80 (80W)
The Weller Silver Line Series has been developed for electronic experts. The tip temperature is electronically
controlled. The maximum temperature is 450°C (WSD 151 550°C) within a tolerance of ±2%. With the
antistatic properties of the power unit and the soldering iron the stations meet all current requirements of ESD
safety. Potential balance of the soldering tip can be effected by a plug. All electronically controlled Weller tools
can be connected up to the maximum power of the according station. The automatic tool recognition provides
the optimal settings of the tools.
Top Attributes
• Digitally controlled electronic for soldering tools up to 80 W
• Temperature range 50°C - 450°C
• Temperature control via buttons
• 3position digital display
• Calibration box WCB 2 may be connected for CALIBRATION, LOCK OUT or OFFSET function
• Key switch
• Protection class 1
• Antistatic housing
• Equipotential bonding (normal state hard grounded)
• Dimensions: 166 x 115 x 101 mm (L x W x H)
Technical Data
Display technology LED
Equipotential Bonding/ hard grounding explanation Normal state
Temperatur control comment Button
Display included & Size Medium
Display information content Medium
ESD safe Yes

Equipotential Bonding/ hard grounding Yes
Display backlight No
Antistatic housing Yes
Temperature stability 5 °C
Power unit wattage 80 W
Mains supply Voltage 230 V
Power supply frequency 50 Hz
Output voltage 24 V
Protection class Soldering iron 3
Protection class Control/ Power unit 1
Number of tools controlled simultaneously 1
Temperature accuracy 9 °C
Temperature regulation 50 - 450 °C