|Origin:||Made In China|
|Category:||Security & Protection / Anti-Stati|
|Label:||Anti static table pa , Anti static floor ma , Factory anti-static|
|Min. Order:||10 pc|
Anti - static table pad details
The anti - static PVC - pad produced by our company has the production method of the bottom layer in the country, and the production process of the bottom layer is used to make the anti - static table pad have good antistatic and conductive effect. Is currently the most excellent production process, in line with the United States STD - 1686C - MIL, MIL - HDBK - 263B and GJB1649 - 93, GJB3007 - 97 standard.
Performance parameters: surface layer (static dissipative layer) resistance 107 - 109 of the friction static potential 100V
The bottom (conductive layer) 103 resistor - 105 Omega friction static potential is less than 50V
Wear rate: 0.02g/cm2, the decay period of electrostatic voltage: 5000-500V < 1.9S
Bulk resistance: 107-1010 CM static dissipation time: <0.5s
2\Physical performance index of anti - static pad (mat):
1.Tensile strength: 3.6mpa
2.Elongation at break: 188%
3.Tearing strength (right angle): 20.6KN/m
4.Resilience (the specimen is composed of 6 layers of sheets): 14%
5.Impact embrittlement temperature (no cut) -250c: no damage
6.Compression permanent change rate 700Cx22h. compression 25%: 17.9
Color: color can be green, gray, blue, black, and so on. The other division can be customized according to customer requirements.
Features: Anti - static table pad is mainly used in anti - static materials and dissipative static materials, such as synthetic rubber, etc.. The surface layer is about 0.5mm thick, and the bottom layer is about 1.5mm thick. Commonly used for 2mm double layer composite structure. The pad use a long time, has good acidproof, anti alkali, anti chemical flux properties, and abrasion resistance, easy cleaning. The conductive mat is made of high quality conductive material and synthetic rubber.
Applicable scope: electronic semiconductor devices, electronic computers, electronic communications equipment and integrated circuits, such as microelectronics industry, the production workshop and advanced test room.
Is mainly used in the table, the assembly line work table, the shelf and the system to make mats, and is suitable for different conditions, different environment needs.
Release human electrostatic potential, so that the body and the table ESD tweezers, tools, instruments, instruments and other reach uniform make electrostatic sensitive devices (SSD) with no interference from electrostatic discharge phenomenon, so as to achieve the effect of effective buffer electrostatic protection, avoid damage of devices.
This product does not contain S, Hg, NH3+, Pb and other harmful substances
Soft: soft, anti elastic, toughness. The product is used in the cold north or south, it can be maintained its softness, smoothness, (spread on the ground, the table is not flat four angle).
International market demand: at present, Japan Europe and the United States and other electronic business to product protection and work environment have become increasingly demanding, they are laying the ground anti-static rubber products are flame retardant requirements; this is conducive to the protection of plant products, and improve the working environment, and strengthen the safety of the plant (fire) and the current on the China market the pad by Japan Europe and the United States and other large electronic enterprises and the electronic communications equipment manufacturers welcome