Home > Products > Industrial Supplies > Machine Hardware > Cutter & Tongs

Single Stroke Diamond Honing Reamer
•High Precision Single-Pass Honing Tools
•Diameter Range: 4mm to 70mm
•Honing Sleeve Types: Sintered Diamond, Electroplated Diamond
•Used on Vertical Honing Machines for Progressive Honing
•Adopted in automobiles, tractors, power machinery, construction machinery, refrigeration machinery, and the aerospace industry.
Specification
Single stroke honing is also called sequential honing or diamond hinge honing tool, it is a new process of micron precision machining, can process through hole, blind hole, keyway hole, step hole and other hole.

It is the engine injection pump, connecting rod, fork, hydraulic valve body, valve sleeve, air bearing, precision gear, die guide sleeve, air conditioner compressor main and auxiliary bearings, refrigerator compressor shaft hole (cylinder hole), piston, measurement ring gauge and other high-precision internal hole processing products commonly used technology. In recent years, single-stroke honing technology has been adopted in automobile, tractor, power machinery, construction machinery, refrigeration machinery and aerospace industry.

Advantages of single stroke diamond honing reamer

●After honing, inner hole size consistency is high, cylindricity is very good.

●Hinge honing has the advantages of high efficiency, good surface quality and high dimensional consistency.

●Stable quality, high precision, long service life.

Single stroke tool, using imported abrasive, high cutting efficiency, fast processing and high precision, suitable for mass production.

The abrasive tools of single-stroke honing have a long service life and high efficiency in processing and production. They can be used in a variety of equipment, such as vertical drill, rotary drill, ordinary lathe, modular machine tool, press machine, vertical or horizontal honing machine tool, etc.
How to use the honing reamer
Put the hinged honing rod into the corresponding honing machine, from the first axis to the last axis, the outer diameter of the honing sleeve abrasive increases in turn, and the abrasive grain size also becomes finer. After the inner hole of the workpiece is honed from the first axis of the honing rod to the last axis, the hole diameter gradually increases, and the roughness gradually decreases. After the last knife, the part can reach the required size, roughness and Geometric Tolerances.