Home > Products > Office Supplies > Education Appliances

The Fischer-Tropsch Waxes are made from carbon monoxide and hydrogen in the presence of the selected catalyst. Generally, the feedstock is produced from coal or natural gas. The final synthetic waxes tend to be saturated, straight-chain hydrocarbons. Their very linear molecular structure results in high melting points, low viscosity, and good hardness.

In PVC processing. Fischer-Tropsch synthetic drop point wax is mainly used as an external lubricant. It has a relative molecular mass of 500-1000. Since, compared to PE wax, Fischer-Tropsch wax has a low molecular weight, low melt viscosity, high melting point, and narrow melting range, the same lubrication effect can be achieved with less dosage and reduce the negative impact of lubricant on the physical and mechanical properties of the PVC products. On adjustment of internal and external lubrication, it has an irreplaceable advantage over PE wax.

KH FT Wax 105 uses the feedstock from coal, They have a fine crystal structure and narrow carbon distribution. Its low viscosity increases the production speed and fluidity of the PVC product. Besides, it can contribute to the dispersion of the pigment and other fillers. KH FT wax 105 can reduce the dosage by about 15%-50% compared to paraffin wax and PE low viscosity wax.

In the processing and production of a masterbatch, KH FT wax 105 can effectively wet and penetrate into the pores of the agglomerated particles to coat the surface of the pigment, and better disperse the pigment aggregate under the action of the shearing force to effectively prevent re-agglomeration

Features of KH FT WAX 105

High melting point    

High stability      

Low viscosity  

Low oil content  

Good hardness

Our KH FT WAX 105 is complied with:

FDA 21CFR175.105(Hot Melt Adhesives Additives)

If you had other FDA requirements, please contact us: info@khonorwax.com

For more custom synthetic paraffin wax, please contact us.

Storage of KH FT WAX 105

Please store products in a cool, dry location, away from sources of intense heat, incompatible materials, water, heat, and flame.

Long-distance transportation or hot atmosphere may have cracked, that does not affect the quality of products.

Application of KH FT WAX 105

In PVC processing as the lubricants;

Hot melt adhesives;

Masterbatches;

Rubber industries;

Pigment and coating;

Polishes;

As one of paraffin wax producers, we will do our best to meet all the needs of customers.