Home > Products > Construction & Decoration > Waterproof Materials

SELF ADHESIVE BITUMEN WATERPROOF TAPE

 GENERAL DESCRIPTION 

The self adhesive bitumen waterproof tape is composed of surface films (PET film, aluminum foil or HDPE film), adhesive rubber/bitumen compound and release film.

 FRES 

* Provides an instant seal

* Easily applied by hand pressure only

* Safe application , no pollution

* Available in wide range of widths, thickness, colorsYPCAL 

* Roof repair of portable buildings

* Replacement or repair of flashing     
* Guttering, down pipes, skylights
* Extensions, porches, window frames & chimneys, jointing for artificial grass
*Caravans & Conservatories
* Sealing parapets, valley gutters
* Seals capping bolts & roof ridges

TECHNICAL DATA 

 PCKIN

Available in 50 mm,75 mm,100 mm,150 mm,200 mm,225 mm,250 mm,300 mm rolls of

2.5 m,3.0 m, 5.0 m,1 0m,20 m length

Special sizes made to order

PLICATION GUIDAN

*  Ensure that the surface is dry and free from dust, rust and loose materials.
*  Prime porous surface e.g. concrete and brick with a bitumen primer or black,      bitumen paint, thinned with white spirit, which is allowed to dry.

*  Cut the flashing tape to the required length.

*  Peel back 5cm (approx) of the release backing paper and position carefully.        Continue removing the backing paper whilst firmly placing the tape to avoid       unnecessary creasing.

*  Smooth down so that the overall contact is complete, and ensure that all air       bubbles are removed. Take care not to damage the surface of the tape.

*  Where tape is joined, ensure that there is an overlap of at least 1inch or 2.5cm.

*  After use release pack and store upright in cool and dry conditions.