| Model: | 齐全 |
|---|---|
| Brand: | Shengcheng |
| Origin: | Made In China |
| Category: | Industrial Supplies / Other Industrial Supplies |
| Label: | Screw air compressor , Air compressor tripl , Vacuum pump oil mist |
| Price: |
¥100
/ pc
|
| Min. Order: | 1 pc |
| Live Chat: |  | Last Online:10 Oct, 2023 |
The oil and gas separation filter element produced by our company uses imported fiberglass paper and sponge, which have high filtration accuracy and stable filtration effect. It is the best product to replace imported filter elements and can be processed and produced according to user requirements.
The oil gas separation filter element is a key component that determines the quality of compressed air discharged from oil injected screw compressors and oil immersed sliding vane compressors. Under correct installation, use, and good maintenance, not only can the high-quality compressed air be ensured, but also a considerable service life can be guaranteed. The compressed air coming out of the air compressor carries oil droplets of all sizes. Large oil droplets are easy to separate through the oil gas separator, while small oil droplets [suspended oil particles] must pass through the micron sized glass fiber filter layer of the oil gas separation filter element. When the correct selection of glass fiber diameter and thickness filter material is used to intercept, diffuse, and aggregate oil and gas in the gas, the best effect can be achieved. Small oil droplets can quickly form large oil droplets, which accumulate at the bottom of the filter element through the filter layer under the action of aerodynamics and gravity. These oils continuously return to the lubrication system through the return pipe inlet at the bottom recess of the filter element, allowing the compressor to discharge purer air and high-quality oil-free compressed air.
The oil and gas separation filter element is designed and manufactured using high-quality imported filter paper, and its various technical indicators have been tested to reach the advanced level abroad. It is suitable for Fusheng, Ingersoll Rand, Atlas, Sullair, Compair and other screw compressor series, including conventional and efficient folded models, both for vertical and horizontal installation.
Oil and gas separation element: gas oil content after separation: ≤ 3mg/m3
Working temperature: ＜ 120 ℃
Initial pressure difference: 0.02mpa
Service life: 4000-6000h
Installation method: vertical and horizontal
Intake direction: external intake, internal intake
Screw type;
The air filter is used for the suction port of the compressor to ensure the cleanliness of the air and maintain a small intake resistance. Our air filter has the following characteristics:
1. Multiple structural forms, including metal end caps and PU end caps, are available for different compressors to choose from.
2. More effective filtration of particles above 5um, ensuring air cleanliness.
3. Smaller intake resistance When the flow rate of the filter is 8m3min, and the ash storage capacity reaches 1000g, the resistance of the filter only increases by 2.2kpa
4. Using imported filter paper, the filter paper has a high porosity and stiffness, coupled with our company's special processing method, it can be used for a long time without folding and has a long service life.
5. The maximum operating temperature is 100 ℃.
6. The correct cleaning method for the filter element can extend its service life.