Model: | - |
---|---|
Brand: | Xinyak |
Origin: | Made In China |
Category: | Electronics & Electricity / Electronic Components / Sense Organ |
Label: | - |
Price: |
US $18
/ pc
|
Min. Order: | 1 pc |
Live Chat: | Last Online:02 Mar, 2022 |
■ XYK- Q01-T67-4NF
▼ Product Features:
● Dual channel pulse signal output,90degree phase difference, can detect rotary speed and direction.
● Built-in polarity and short circuit protection.
● Wide temperature range
● Good EMC anti-interference ability.
● High IPgrade:IP67.
● Mainly used in electric tour car, electric golf carts, electric forklifts and other fields.
Dimension: 48 & 64 gear teeth, internal diameter:20 & 27mm
▼ Specification:
Character |
Parameter Values |
Instruction |
Fixing gap |
0~2mm,typical fix gap 1mm |
When the rotary frequency is high, the installation clearance shall be as small as possible. |
Target tooth width |
2 mm±0.1 mm |
Tooth module m=1.25, Iron Gear |
Target groove width |
2 mm±0.1 mm |
Tooth module m=1.25, Iron Gear |
Tooth depth |
>3mm |
Tooth module m=1.25, Iron Gear |
Tooth width |
10mm |
Tooth module m=1.25, Iron Gear |
Working temperature |
-40~140℃ |
Continue operating temperature |
Service voltage |
DC4.5~24V/ DC10~30V |
|
Max reverse voltage |
60VDC |
|
Operating current |
16mA |
|
Load current |
<80mA |
|
Signal output form |
square wave, collector, open collector |
90°phase difference between two signal A and B channels. when open collector output, the inner pull-up resistor is 5KΩ |
AB phase-difference |
90±45 Degree |
Tooth module m=1.25 |
Output high Level |
>(VCC-0.5V) |
|
Output low level |
<0.5V |
|
Response frequency |
1~20KHz |
|
Signal rise time |
<10us |
|
Signal fall edge time |
<1us |
|
IP grade |
IP67 |
Can be operated in liquid environment |
Connecting form |
AMP 4pins |
VCC GND A B |
AMP4 Pin |
definition |
1 |
VCC |
2 |
GND |
3 |
Out A |
4 |
Out B |