Home > Products > Industrial Supplies > Construction Machine

•  The work principle of  concrete wall panel extrusion machine 

The extrusion process involves feeding dry mix concrete onto rotation screws by means of a moving electric hopper. The screws force the concrete through shaping plates and out of the rear of the extrusion machine, while holes are forced into the concrete panels by circular mandrels, trailing behind the screw augers. During the process, the extrusion machine is propelled by the backpressure of the concrete and together with various vibrating plates. It produces an extremely well-compacted concrete hollow core wall panel.

• Main models:

JQT 6 ×60;JQT 7.5×60;JQT9 ×60;JQT 100 ×60;JQT 12 ×60;JQT 15 ×60;JQT 200 ×60;

• Main features :

Purpose : The machine is used for the production of concrete lightweight partition wall panel

Principle :The machine adopt extrusion technology, movable forming.
Materials :The raw materials are fly ash, slag, creamsite, cinders,cinerite, pumice,vermiculite and so on. You can choose some materials as per your local resources.
Producity: The production speed is 1.3-1.7 m per minute , 500 Sqm per shift .
Sizes :       Panel width : 600mm;

                Panel Thickness : 75,80,90,100,120mm ,etc ;

                Panel length : cuting any length as your requirements 

Reinforcement : Both sides of the wall panels can insert reinforcement wires, diameter of 1.8- 4mm.