Home > Products > Electronics & Electricity > Transducer

Parameters: 

Input voltage range: DC 5.3-32V

Output voltage range: DC 1.2-32V (input should be at least 0.8V higher than output)

Output current: 8A for long-term stable work. If strengthen heat dissipation can reach 12A.

Output power: natural cooling 120W (within 8A). If enhance cooling can reach 160W

Voltage display: resolution 0.05v, range 0-32V

Current display: resolution 0.01A, range 0-12A

Conversion efficiency: about 96%

Working current: about 25mA

Size: 82*52*32mm 

Weight: 80g

Features: 

Soft start: Yes (it may fail when the high-power loaded module is started)

Input reverse connection protection: Yes

Output end anti backflow: none (if charging the battery, power on the module first and then connect the battery, and ensure that the battery voltage is lower than the output voltage; if possible, please connect the anti backflow diode in series at the output positive pole)

Short circuit protection: Yes

LCD Display: the buck converter is designed with LCD, can display input and output voltage, output current and output power; 

Application: the volt conversion board can be used as an ordinary buck module with over-current protection; used as a high-power LED constant current driver module, Lithium battery charging ,DIY a solar power controller, etc.