Home > Products > Chemicals > Adhesives & Sealants

HPMC for mortar

Take the required amount of hot water into the container and heat to above 85., stir slowly and add the product gradually The cellulose initially floats on the water, but gradually disperses in water and forms homogeneous slurry.

Hydroxypropyl Methylcellulose Description

No primer or curing required thus there is considerable cost saving

Protects expensive paints from moisture and flaking

Highly durable and water resistant

Prevents the growth of algae and fungus

Economical and long lasting

Dissolution Method(HPMC)

1. Take the required amount of hot water into the container and heat to above 85., stir slowly and add the product gradually The cellulose initially floats on the water, but gradually disperses in water and forms homogeneous slurry. Goon stirring until it cools down and becomes clear

2. Another way is by heating the amount of 1/3 or 2/3 water to above 85℃, add the cellulose to obtain hot slurry, then add the remaining cold water and keep stirring, the mixture is obtained when the slurry cools to about 20 ℃

3. Cellulose's mesh is fine, and it 's in the presence of separate small particles in evenly stirred powder and can rapidly dissolve in water

4. Or add the cellulose slowly and evenly at room temperature and keep stirring until clear solution is obtained