Model: | PZ-1240 |
---|---|
Brand: | - |
Origin: | Made In China |
Category: | Industrial Supplies / Machinery / Machine Tool |
Label: | Electril tool , pressing tools , crimping tools |
Price: |
US $20
/ pc
|
Min. Order: | 2 pc |
Live Chat: | Last Online:22 Jul, 2021 |
Axial Pressing Tool PZ-1240 for Pex System with Clamping Range 16mm,20mm,25mm,32mm
Clamping Force | 20KN |
Stroke | 40mm |
Clamping range | 16-32mm |
Connecting/ charge | 320 times |
Working cycle | 3s-10s |
Battery voltage | 18V |
Battery capacity | 3.0 Ah |
Charging time | 2hours |
Package | Plastic case |
Accessories | |
Dies | 16-20mm, 25-32mm |
Battery | 2pcs |
Charger | 1pc |
Sealing ring of cylinder | 1set |
Sealing ring safety valve | 1set |
Axial Pressing Tool PZ-1240 for rehau system with clamping range 16mm,20mm,25mm,32mm
Micro computer control system-automatically detect the pressure when it is crimping, with double safety protect.
Pressure released automatically Function-the tool stop forcing the pressing and release 90% pressure when the pressure reached maximum.
The tool equipped with a double piston pump which characterized by a fast approach towards the connecting material and transfer to high pressure automatically by slow crimping.
The crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
If a deviation from the set operation pressure or low battery charges is identified, an acoustic signal sounds and a red display flashes.
One key control-press the trigger to start working, half loosing the trigger means stop forcing pressure, loosing fully means piston return to the original position.
Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of no operation, the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.
A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.
Price Terms: | EXW |
---|---|
Payment Terms: | T/T |
Lead Time: | 7 days |