Electroplating Effect Solvent Based Resin Silver Liquid Good Adhesion
Product Description
Mirror-like effect coatings resin BC5043
Mirror-like effect paint is a new developed paint, which is composed of special resins and precious metal pigment. The metal flashing is very similar to electroplating.
BC5043 Physical and Chemical Data:
| Test item |
Standard |
| Appearance |
Silver liquid |
| Hardness |
48h:Grade F |
| Adhesion |
48h:<1 |
| Dry time-by touch |
5mins(25℃) |
| Dry time-harden |
<6 hours (relative humidity 70%) |
| Thickness(μm) |
10 |
Characteristic＆Note:
- Mirror effect on PCPSPMMAPET. Glass etc, transparent materials. Good adhesion and solvent resistance.
- Directly spray by low-pressure gun without dilution on the PCPSPMMAPET, Glass material.
Dry time: surface dry<5 mins, thorougly dry<6 hours.
Construction Description:
- Thoroughly stir it before use.
- Before spray, make sure the surface of materials clean by dust elimination, oil disposing, water elimination.
- Spray the film evenly, pervious to light is allowed.
- In order to make better mirror effect, spraying a layer of protective paint on the mirror-effect paint is recommended to enhance theresistance to scratch and antiwear.
- Better mirror effect showed in the condition of hot spray(baking glass to the temperature around 30℃).
- Clean and cool working place recommended, high temperature and humidity or polluted circumstance not allowed.
Mirror-like effect coatings resin BC5043
Mirror-like effect paint is a new developed paint, which is composed of special resins and precious metal pigment. The metal flashing is very similar to electroplating.
BC5043 Physical and Chemical Data:
| Test item |
Standard |
| Appearance |
Silver liquid |
| Hardness |
48h:Grade F |
| Adhesion |
48h:<1 |
| Dry time-by touch |
5mins(25℃) |
| Dry time-harden |
<6 hours (relative humidity 70%) |
| Thickness(μm) |
10 |
Characteristic＆Note:
- Mirror effect on PCPSPMMAPET. Glass etc, transparent materials. Good adhesion and solvent resistance.
- Directly spray by low-pressure gun without dilution on the PCPSPMMAPET, Glass material.
Dry time: surface dry<5 mins, thorougly dry<6 hours.
Construction Description:
- Thoroughly stir it before use.
- Before spray, make sure the surface of materials clean by dust elimination, oil disposing, water elimination.
- Spray the film evenly, pervious to light is allowed.
- In order to make better mirror effect, spraying a layer of protective paint on the mirror-effect paint is recommended to enhance theresistance to scratch and antiwear.
- Better mirror effect showed in the condition of hot spray(baking glass to the temperature around 30℃).
- Clean and cool working place recommended, high temperature and humidity or polluted circumstance not allowed.
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
