Home > Products > Industrial Supplies > Machine Hardware > Fastener & Fitting

Eccentric Check Nut

our company develops and manufactures more than 10 kinds of series products: undercut anchors, self-undercutting anchors, undercut panel anchors, adhesive anchors (chemical anchors), carbon fiber fabric (Japan Toray filament, Tairyfil), carbon fiber sheet, carbon fiber plate, prestressed anchorage device, carbon fiber adhesive, crack sealing adhesive, steel bonding adhesive, anchorage adhesive, crack filling adhesive, weather proofing sealant, structural adhesive, cast-in channels and so on.

Material: carbon steel; stainless steel; nonferrous metal

Consist: Main nut: convex nut (lower nut)

Auxiliary nut: concave nut (upper nut)

stainless steel Eccentric Check Nut Instruction guide:

● Lock the overall nuts firstly, then tighten the nut to lock; dislocate the above marked sign to less than 90 degrees, then it reaches the lock-up effect. 

● There is no loose off in severe vibration, so it avoids the trouble of shutdown maintenance caused by common nut loosening. 

Instruction guide:

● Lock the overall nuts firstly, then tighten the nut to lock; dislocate the above marked sign to less than 90 degrees, then it reaches the lock-up effect. 

● There is no loose off in severe vibration, so it avoids the trouble of shutdown maintenance caused by common nut loosening.