Home > Products > Industrial Supplies > Mining Machine

The latest tailings treatment technology of Longding Company is that the tailings pulp exported by mineral processing process is concentrated and then processed by dewatering vibrating screen equipment. The moisture content of the product on the tailings dewatering screen is usually less than 20%, which can be directly transferred to a fixed location for dry storage.

If used in conjunction with a filter or filter press, the area of the filter press and filter can be greatly reduced.

Because of the remarkable advantages of this process, it has been popularized and applied in our country very quickly.

Longding environmental protection tailings can be customized according to the actual situation of the tailings dry discharge process:

Tailings ponds whose service life should be extended;the closed tailing ponds should be reused;It is necessary to fill pits and fields with dry slag discharge;

Tailings ponds with serious water seepage;Areas with serious water shortage

How does tailings dewatering screen work?

When the tailings dry draining screen is used for dry tailing of tailings, the workflow is as follows:

The feed tailings are evenly fed into the feed inlet of the sieve by the feeding box. Firstly, about 1/3 of the water is removed at the level of 45 degrees to install the drain screen, and the combination of the flat sieve plate and the inclined sieve plate is entered. After the Ministry, the accumulation of materials appeared, the slime particles settled by gravity, and began to form a thinner filter layer, which in turn prevented the remaining particles from passing through the sieve, so that the filter layer gradually thickened.

The water that fails to pass through the sieve forms a pool in the upper part of the filter layer. Since the filter layer is thinner here, the water gradually gradually removes under strong motion. Due to the high-frequency low-amplitude vibration state, the tailings vibrating the filter layer is formed. More and more compact, to the discharge opening, the material forms a filter cake, the water in the tailings is removed from the screen surface, and the other parts appear on the surface of the material layer due to the capillary action. It will overflow from the discharge opening, and the surface water will flow to the joint pool.