Plain Bearings Made of High-Performance Plastics Self-Lubricating Bearing Plain
Product Description
SF-2 Washer Steel Bronze Powder with POM Marginal Bearings
Material: Steel+bronze+POM
Suitable for rotating and oscillating movement, less maintenance requirements due to the long re-lubrication intervals, lower wear, lower susceptibility to edge loading, no absorption of water and therefore no swelling, good damping behaviors, good resistance to shock loads.
| Tech. Data |
| Max. Load P |
Static load |
250 N/mm² |
|
Temp. limit |
-40 ºC~+130 ºC |
| Very low speed |
140 N/mm² |
Max. Speed V |
Pre-lubricated |
2 m/s |
Rotating load
Oscillating load |
70 N/mm² |
Continuous Grease |
2.8 m/s |
| Max.PV |
3 N/mm²*m/s |
Thermal conductivity |
50w(m*k)-1 |
| Coefficient of thermal expansion |
11*10-6K-1 |
Friction coefficient |
0.05~0.20 |
| Initial pre-lubrication at assembly is strongly recommended. |
Product Image
Img 1
Send Inquiry to this Member
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
