| Model: | 324564 |
|---|---|
| Brand: | King Honor |
| Origin: | - |
| Category: | Chemicals / Other Chemicals |
| Label: | fischer tropsch wax |
| Price: |
¥700
/ pc
|
| Min. Order: | 1 pc |
| Live Chat: | Last Online:17 May, 2019 |
Features:
High melting point
High stability
Low Viscosity
Low oil content
Good hardness
Application:
In PVC processing as the lubricants
Hot melt adhesives
Master batches
Rubber industries
Pigment and coating
Polishes
The fischer tropsch wax for pvc are made from carbon monoxide and hydrogen in the presence of the selected catalyst. Generally, the feedstock is produced from coal or natural gas. The final synthetic waxes tend to be the saturated, straight-chain hydrocarbons. Their very linear molecular structure results in high melting points, low viscosity, and good hardness.
In PVC processing. Fischer-Tropsch synthetic wax is mainly used as an external lubricant. It has the relative molecular mass of 500-1000. Since, compared to PE wax, Fischer-Tropsch wax has a low molecular weight, low melt viscosity, high melting point, and narrow melting range, the same lubrication effect can be achieved with less dosage and reduce the negative impact of lubricant on the physical and mechanical properties of the PVC products. On adjustment of internal and external lubrication, it has the irreplaceable advantage than PE wax.
KH FT Wax 105 use the feedstock from coal, They have the fine crystal structure and narrow carbon distribution. Its low viscosity increases the production speed and fluidity of the PVC product. Besides, it can contribute to the dispersion of the pigment and other fillers. KH FT wax 105 can reduce the dosage by about 15%-50% compared to paraffin wax and PE wax.
In the processing and production of a masterbatch, KH FT wax 105 can effectively wet and penetrate into the pores of the agglomerated particles to coat the surface of the pigment, and better disperse the pigment aggregate under the action of the shearing force to effectively prevent re-agglomeration
|
Items |
Test method |
Standard |
Typical Data |
|
Viscosity,cps@1 40℃ |
Brookfield |
10-25 |
10.6 |
|
Drop point, ℃ |
ASTM D3954-94(2004) |
|
102-103 |
|
Penetration,0.1mm/100g, 5s at 25℃ |
ASTM D1321-2010 |
2-8 |
3 |
|
Acid No, mg KOH/g |
ASTM D-1386 |
|
0.35 |
|
Oil content% |
ASTM D721-2006 |
＜0.2 |
0.15 |
|
Color, Saybolt |
Gardner color |
|
1 |
Our KH FT WAX 105 is complied with:
FDA 21CFR175.105(Hot Melt Adhesives Additives)
If you had other FDA requirements, please contact us : info@khonorwax.com
Storage
Please store products in a cool, dry location, away from sources of intense heat, incompatible materials, water, heat, and flame.
Long-distance transportation or hot atmosphere may have cracked, that does not affect the quality of products.
