Home > Products > Electronics & Electricity > Telecommunication & Broadcasting > Wireless Equipment

Battery Powered LoRa Wireless Temperature Humidity Sensor with LCD Display 1Battery Powered LoRa Wireless Temperature Humidity Sensor with LCD Display 2Battery Powered LoRa Wireless Temperature Humidity Sensor with LCD Display 3Battery Powered LoRa Wireless Temperature Humidity Sensor with LCD Display 4Battery Powered LoRa Wireless Temperature Humidity Sensor with LCD Display 5
  • Battery Powered LoRa Wireless Temperature Humidity Sensor with LCD Display 1
  • Battery Powered LoRa Wireless Temperature Humidity Sensor with LCD Display 2
  • Battery Powered LoRa Wireless Temperature Humidity Sensor with LCD Display 3
  • Battery Powered LoRa Wireless Temperature Humidity Sensor with LCD Display 4
  • Battery Powered LoRa Wireless Temperature Humidity Sensor with LCD Display 5

Battery Powered LoRa Wireless Temperature Humidity Sensor with LCD Display

Model:XZ-DS01-TH2C
Brand:thingsend
Origin:Made In China
Category:Electronics & Electricity / Telecommunication & Broadcasting / Wireless Equipment
Label:lora sensor , humidity sensor , temperature logger
Price: US $65 / pc
Min. Order:1 pc
Inquire Now Add to Basket

Member Information

Detail

Shenzhen Xinzhitongxin Technology Co.,Ltd

Free MemberGuang Dong - China
Live Chat:
Last Online:04 Nov, 2020

Product Description

Product Features:

● Install and work, with LCD display; 

● Cycle detection, cycle can be set

● Automatic registration, adapt to the concentrator;

● Automatic routing, adapt to repeater;

● Built-in 3pcs AA batteries, 2-5 years battery lifespan (depending on acquisition cycle);

● wireless transmission up to 5km

● Pressing-key setting, give an alarm when exceeding threshold value;

● Centralized acquisition, multi-mode output.

Operation process

1.Key Setting Function

  12

Key1 to Key 5 is counted from left to right;

Key No.1

Key No.2

Key No.3

Key No. 4

Key No.5

Clock set

Mode switch

Trigger set/Setting bit switch

Value +

Value -

2.Key-setting function Instruction

Key

Definition

Description

Key No.3

Trigger set/setting bit switch

After power-up, short press this key to enter setup mode, LCD backlight will light up. If no other key is pressed within 4 seconds, it will automatically exit the setting mode and trigger the wireless data transmission. In setting the alarm threshold mode, pressing this key will switch the high and low bits of the value. In the clock setting mode, the clock's minutes and seconds can be switched and the threshold value can be quickly set.

Key No.2

Mode switch

In the setting mode, short press the key will cycle into following setting scenario: the upper temperature threshold, the lower temperature threshold, the temperature alarm back-off value, the humidity upper threshold, the humidity lower threshold, and the humidity alarm back-off value. In any of these scenarios, various thresholds can be quickly set by pressing key No. 3, No. 4 and No.5

Key No.4

Value +

Temperature plus/minus sign bit/ increment of selected value(0~9)

Key No. 5

Value -

Temperature plus/minus sign bit/decrement of selected value(0~9)

Key No. 1

Clock set

In the setting mode, enter the clock setting function, the clock is 24 hours

3.Key setting temperature upper/lower threshold, humidity upper/lower threshold, temperature alarm back-off value, humidity alarm back-off value, real time clock

3.1 Key setting temperature or humidity upper limit alarm threshold

  • Setting step 1: Press key No.3 shortly to enter key setting mode. At this time, the LCD backlight is lit.
  • Step 2: Shortly press key No.2 to switch the setting items.The positive/negative sign of the temperature/humidity upper limit alarm value starts to flash, and the upper triangle mark appears.
  • Step 3: Shortly press key No.3 to quickly switch the ten, one and decimal places of the set value.
  • Step 4: Shortly press key NO.4 or key No.5 to increase/decrease the set value.

TH2C_

3.2 Key setting temperature or humidity lower limit alarm threshold

  • Setting step 1: Press key No.3 shortly to enter key setting mode. At this time, the LCD backlight is lit.
  • Step 2: Shortly press key No.2 to switch the setting items.The positive/negative sign of the temperature/humidity upper limit alarm value starts to flash, and the lower triangle mark appears.
  • Step 3: Shortly press key No.3 to quickly switch the ten, one and decimal places of the set value.
  • Step 4: Shortly press key No.4 or key No.5 to increase/decrease the set value.

2C-2_

3.3 Key setting the temperature or humidity alarm return threshold

  • Setting step 1: Press key No.3 shortly to enter key settinmode. At this time, the LCD backlight is lit.
  • Step 2: Shortly press key No.2 to switch the setting items.The tens digit of the temperature/humidity alarm back-off threshold starts to flash, and the up/down triangle mark appears.
  • Step 3: Shortly press key No.3 to quickly switch the ten,one, and decimal places of the set value.
  • Step 4: Shortly press key No.4 or key No.5 to increase/decrease the set value.

2C-3_

3.4 Key setting the real-time time

  • Setting step 1: Press key No.3 shortly to enter key setting mode. At this time, the LCD backlight is lit.
  • Setting step 2: Shortly press key No.1 to enter the clock setting mode, and tens digits of the hour flash.
  • Setting step 3: Shortly press key No.3 to quickly switc the tens digits and units digit of the set value
  • Setting step 4: Shortly press key No.4 or key No.5 to increase/decrease the set value

2c-4_

Data Protocol

Example:GW_ID:45658,TYPE:T&H,ID:1100001002,STAT:00000001,T:24.0℃,H:92.8%,ST:30M,V:3.50v,

SN:109,RSSI:-106dBm,E:160.2020,S:110.2020,Time: 2018-2-4 14:20:39,T_RSSI:-91dBm

         Explain:

GW_ID: collector ID (45658)

TYPE: T&H(temp&humidity sensor)

ID: sensor address(1100001002)

STAT: sensor status word

BIT7=1 trigger and report; BIT6= 0CH,1CH;  BIT5=1 repeater;          BIT4=1 invalid data;

BIT3= reserve; BIT2=1 searching for network; BIT1=0, low speed,1high speed; BIT0=1start

T:environmental temperature 24.0℃

H: environmental humidity 92.8%

ST: reading time interval 30mins

V: battery voltage 3.50V

SN: sending serial No. 109

RSSI: wireless signal strength -106dBm

East longitude E: 160.2020, Northern latitude N:110.2020

Time: 2018-2-4 14:20:39

T_ RSSI: sensor receiving signal strength -91dBm

 

 

Technical Parameters

Sensor parameter

Basic Parameter

Temperature Accuracy:<0.5℃(0℃~80℃)& < 2℃(-40℃~0℃)

Working frequency:476.505 & 488.505MHz(frequency can be customized)

Humidity Accuracy:< ±3%

Transmitting power:<17dBm

Acquisition cycle :5~240mins

Transmitting current:<120mA

Working temperature:-40~80℃

Transmission distance:>5KM(LOS)

Working Life-Span: > 5years   Note: Over 80% effective communication distance, working life is related to acquisition period (1 year @ 5 minutes, 5 years @ 30 minutes)

Applications

Environmental monitoring, medical and health, energy and chemical industry, warehousing and transportation, cold storage chain, constant temperature and humidity workshop, office space and other fields.

Company Information:

Shenzhen Thingsend Communication Technology Co.,Ltd

Email:sales(at)thingsend(dot)com

Contact:sarah yuan

Skype ID:+86 188 2073 9215 (skype name:wireless solutions-sarah yuan)

 ​We're professional manufacturer of wireless sensors,2g 3g 4g lte GSM modem,Lora,wireless data radio modems,OEM/ODM,wireless customized solutions/system/applications.

Welcome to contact Sarah for more information about wireless solution.


Product Image

Battery Powered LoRa Wireless Temperature Humidity Sensor with LCD Display 1
Img 1
Battery Powered LoRa Wireless Temperature Humidity Sensor with LCD Display 2
Img 2
Battery Powered LoRa Wireless Temperature Humidity Sensor with LCD Display 3
Img 3
Battery Powered LoRa Wireless Temperature Humidity Sensor with LCD Display 4
Img 4
Battery Powered LoRa Wireless Temperature Humidity Sensor with LCD Display 5
Img 5

Send Inquiry to this Member

Shenzhen Xinzhitongxin Technology Co.,Ltd

Maker Mansion,Chaguang Road,Nanshan district

Phone:
86-18820739215
Fax:
Contact:
Sarah Yuan (Sales)
Mobile:
18820739215

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Wireless Equipment Made In China Products

,  

Wireless Equipment China Suppliers and China Manufacturers