Home > Products > Electronics & Electricity > Optical Fiber, Cable & Wire > Power Cable

Application: Used for power and distribution circuits in industrial and commercial installations,power circuits in generating plants where line to ground fault current are within shield capabilities. Can be used in wet or dry locations,installed in raceways,duct and open air,aerially or directly buried as permitted by NEC.

Standards: UL1072 Medium Voltage Power Cables,ICEA S-93-639/NEMA WC74 5kV-46kV Shielded Power Cables,ICEA S-97-682 Utility Shielded Power Cables Rated 5kV-46kV,AEIC CS8 Specification for Extruded Dielectric Shielded Power Cables Rated 5kV-46kV.

Example: MV-90 Power Cable,5kV,3 cores,CU/XLPE/CTS/PVC

Standards: ICEA S-93-639/NEMA WC71/UL 1072

Maximum Operating Voltage: 5kV-35kV 100% and 133% IL Maximum conductor operation temperatures,wet and dry locations normal is 90℃,emergency is 130℃,short circuit is 250℃.

Construction: Conductor: Soft annealed uncoated copper compacted Class B per ASTM B496 or hard drawn Aluminum-1350 compacted Class B per ASTM B400. 

Conductor Shield: Semi conducting cross-linked polyethylene (XLPE). 

Insulation: Thermoset crosslinked polyethylene (XLPE). 

Insulation Shield: Semi conducting cross-linked polyethylene (XLPE). 

Metallic Shield: Soft annealed uncoated copper tape, 5 mil thick, 25% minimum overlap. 

Assembly: Conductors cabled with non-hygroscopic fillers, as required and binder tape. 

Jacket: Black sunlight resistance and flame retardant thermoplastic polyvinyl chloride (PVC) compound.100% and 133% Insulation levels(90 mil)