ground tungsten carbide nibs YG8
Product Description
- Processing Level：surface ground
- Grade：YG8
- Finished goods inventory：0/PCS
- Specification：φ30*φ9.0*25 Millimeter
- Tolerance：OD:-0.2+0.3;ID:-0.25-0.45;Height:-0.35+0.35 Millimeter
- Delivery time：Moulds Available But No Stocks
- Shipping：Free Shipping to United States via ePacket
-
Straight wire drawing dies: it divided into 4 parts, The entrance area, work area, sizing area, exit area/un-lubrication area/lengthened work area, entrance area and work area are extended,, so that the wire enters the work area In the middle section, the wedge angle of the upper half of the working area and the upper half of the working area is used to establish a "wedge effect", and a denser and firm lubricating film is formed on the surface of the wire to improve the lubricating effect. However, there is no transition arc between the work area and the sizing area. More carbide drawing die information in wococarbide. During the drawing process, the wire and the wire forming surface are worn, and the test proves that the straight type is three to four times longer than the circular type.the sizing area. During the drawing process, the wire and the wire forming surface are worn, and the test proves that the straight type is three to four times longer than the circular type.
-
Straight wire drawing dies: it divided into 4 parts, The entrance area, work area, sizing area, exit area/un-lubrication area/lengthened work area, entrance area and work area are extended,, so that the wire enters the work area In the middle section, the wedge angle of the upper half of the working area and the upper half of the working area is used to establish a "wedge effect", and a denser and firm lubricating film is formed on the surface of the wire to improve the lubricating effect. However, there is no transition arc between the work area and the sizing area. More carbide drawing die information in wococarbide. During the drawing process, the wire and the wire forming surface are worn, and the test proves that the straight type is three to four times longer than the circular type.the sizing area. During the drawing process, the wire and the wire forming surface are worn, and the test proves that the straight type is three to four times longer than the circular type.
| Payment Terms: | T/T in advance |
| |
Product Image
Send Inquiry to this Member
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
