|Origin:||Made In China|
|Category:||Industrial Supplies / Machinery / Pumps Vacuum Equipment|
|Label:||Piston Vacuum Pump , vacuum pump , Roots Vacuum Pump|
I. summary of H slide valve type vacuum pump
Performance Specification for H-Slide Valve Vacuum Pump: Geometric Pumping Speed 150 L/s, Limit Pressure 1 Pa (8_10-3 Tors). It is suitable for vacuum smelting, vacuum drying, vacuum coating, vacuum impregnation and other vacuum operations. H-slide valve vacuum pump can be used alone or as the front-stage pump of other vacuum pumps, but it is not suitable for pumping from one container to another as a conveying pump. Devices should be attached when the gases containing excessive oxygen, explosive, corrosive to ferrous metals, chemical reaction to vacuum oil, water and dust are removed. This type of pump can be used alone, also can be used as diffusion pump, oil booster pump, roots pump and other high vacuum pump front pump, relative to rotary vane vacuum pump, H type slide valve pump is more durable, H type slide valve vacuum pump service life is long. The pump is widely used in vacuum coating, vacuum heat treatment, vacuum sintering, molecular distillation and aviation simulation test.
Two. The characteristics of H slide valve vacuum pump are:
1. After optimized design counterweight, less vibration and low noise.
2. The bearing seal chamber is separated from the pump chamber by oil supply alone, so as to avoid impurities entering the bearing and premature damage of the seal.
3, according to the requirements of users, the auxiliary fuel tank can be attached to achieve the function of separating impurities from cooling vacuum oil.
4, in addition to the old H-150, the motor is placed above the pump, with compact structure and less floor space.