|Origin:||Made In China|
|Category:||Electronics & Electricity / Electronic Instrument / Electronic Measurment Apparatus|
|Label:||Thickness Gauge , Thickness Tester , Ultrasonic|
|Min. Order:||1 Piece|
1, 0.1mm Resolution.
2, Memory Function: 5 arrays are divided to store 500 thickness values.
3, Minimum Value Checking: Move the probe along the surface of the testing material, UM-1 is able to automatically find the thinest point.
4, Warning Function: If the measured value exceeds the pre-set thickness limit, the warning tone will start.
5, Two thickness units of millimeter and inch are supported.
6, Two language interfaces of Chinese and English are supported.
Ultrasonic Pulse/echo Method
depending on probes, materials, surface conditions
Unit and Display Resolution
Probe Zero Adjustment
1-point Calibration (normal measuremnet)
2-point Calibration (curve surface measurement or other special application with precision)
V -Path Correction
Up to 1in: ±0.002in or ±0.1mm,Above 1in: ± 1%H(H is the height of the testing object)
128×64 dot-matrix LCD screen with EL backlight (42×57mm), Digit height 13.75mm
Measurement Update Rate
4Hz in standard measurement mode
Material Velocity Range
Data Logger Capacity
Up to 500 readings can be divided into a maximum of 5 files(user-selectable)
Two 1.5V AA alkaline batteries, warning with low battery voltage
Up to 200 hours(without backlight) with alkaline batteires
Auto shut-off: after 5 minutes of non-use
-10 ºC- +50 ºC, Specification to -20 ºC on request
200g including batteries
UM-1 thickness gauge unit
Couplant (Empty Bottle)
Certificate of quality
Numeral probes on request;
4-step/5-step/6- step calibration block;
Couplant and high-temperature couplant;
Application software with Data transmission cable