|Origin:||Made In China|
|Category:||Industrial Supplies / Machinery / Filters|
|Label:||string wound filter , thread filter , water filter|
|Min. Order:||1 pc|
water filter,pp string wounding cartridge filter,pp yarn filter cartridge for nickel plating solution
Our company specializes in the production of PP string wound filter, filter using sophisticated textile fibers wrapped around the porous skeleton. 10-inch PP wound filter is to determine the accuracy of its filter in accordance with its filament winding density filter holes form. 10inch PP wound filter out the liquid can effectively suspended solids, particles, etc., the maximum pressure 0.8Mpa, good compatibility and residue load capacity.
Applicable PH: 1-13
Working pressure: 0.6Mpa polypropylene skeleton,stainless steel skeleton 0.8Mpa
Working temperature: Fiberglass 90 ℃, absorbent cotton string 120 ℃, other cotton fiber, 90 ℃
Filter Length: 10,20 30 40 inches
Filter Diameter: φ65mm
Tangle cord specifications: PP line, cotton thread
|Materials Of Construction||Filter Media:||Polypropylene/Bleached Cotton/Glass Fiber|
|Micron Rating:||1.0, 5.0, 10, 20 um|
|Inner core:||Polypropylene/Stainless Steel|
|O-rings/gaskets(Only for 226, 222 Ends):||Silicone, Nitrile, EPDM, Viton, etc|
|Cartridge Dimensions||Outer Diameter:||63mm(2.5"), 114mm(4.5")|
|Length(based on Cut Ends):||10"- 254mm, 20"- 508mm, 30"- 762 mm, 40" - 1016mm|
|Filtration Area(m2):||0.4 m2 per 10''|
|Operating conditions||Operating Temperature.:||90℃|
|Polypropylene:||80℃ (176℉) at P≤1.0 bar (14psi)|
|Bleached Cotton:||150 ℃(300℉) at P≤1.0 bar (14psi)|
|Max. Differential Pressure|
|Polypropylene:||4.0 bar(58psi) at 25℃ (77℉)|
|Bleached Cotton:||5.0 bar(72psi) at 25℃ (77℉)|
|PH Value compatibility:||1-13|
(1)Continuous polypropylene wirewound filter element, all the parameters was arrange by the computer ,which ensure the product performance.
(2) Uniform working in full filter element/epoxy coated filter
(3) With stainless steel threaded coupling centers and interface connector.
(4) The special design for backflushing .
(5) High-pollution capacity in full-length filter.
(6) Run a small resistance, strong adsorption.
(7) Provide different sizes filter element for powdex/ pre-filters.
(9) Large flow rate, smaller area, easily installation.
(10) Simple system.There is no pollution acid consumption and waste, deal with the waste easily to protect for well environment.
(11)Low-cost investment , small pressure loss during the treatment
Pharmaceutical industry: a variety of injection drug pre-filter and bottle water injection, pre-filter and a variety of large infusion of antibiotics, traditional Chinese medicine injection
Food industry: alcohol, beverages, drinking water filtration
Electronics industry: water, ultra-pure water filtration
Petroleum and chemical industry: a variety of organic solvents, acid and alkali liquid filtration, oil field water filter
Common water filter element end cape for reference: