Home > Products > Construction & Decoration > Construction Materials Stocks

Shear Connectors Welding Studs ISO 13918 1Shear Connectors Welding Studs ISO 13918 2Shear Connectors Welding Studs ISO 13918 3Shear Connectors Welding Studs ISO 13918 4Shear Connectors Welding Studs ISO 13918 5Shear Connectors Welding Studs ISO 13918 6Shear Connectors Welding Studs ISO 13918 7Shear Connectors Welding Studs ISO 13918 8Shear Connectors Welding Studs ISO 13918 9
  • Shear Connectors Welding Studs ISO 13918 1
  • Shear Connectors Welding Studs ISO 13918 2
  • Shear Connectors Welding Studs ISO 13918 3
  • Shear Connectors Welding Studs ISO 13918 4
  • Shear Connectors Welding Studs ISO 13918 5
  • Shear Connectors Welding Studs ISO 13918 6
  • Shear Connectors Welding Studs ISO 13918 7
  • Shear Connectors Welding Studs ISO 13918 8
  • Shear Connectors Welding Studs ISO 13918 9

Shear Connectors Welding Studs ISO 13918

Model:Shear Connector
Brand:Shear Connectors Welding Studs ISO 13918
Origin:Made In United States
Category:Construction & Decoration / Construction Materials Stocks
Label:ISO 13918 Shear Stud , Shear Connectors , Stud Welding
Price: -
Min. Order:-
Inquire Now Add to Basket

Member Information

Detail

ROLEX MATERIALS CORPORATION

Biz MemberIndia
Live Chat:Last Online:13 Apr, 2021

Product Description

Shear Connectors Welding Studs ISO 13918


We are Manufacture, Stockholder & Distributors of ISO-13918 Shear Connector, Shear Stud, Welding Stud, Type SD1, Type SD2, AWS D1.1, AWS D1.5, BS 5400 in Mild Steel, Carbon Steel, Low Carbon Steel, Stainless Steel used in Steel Building, Bridges

We are leading global manufacturer and distributor of weld stud fasteners and application equipment
serving a broad range of markets on a worldwide basis including the automotive, construction and industrial markets.
Stud welding products are suitable for the fastening needs of virtually every industry and our products include externally threaded fasteners, shear connectors, concrete anchors, punching resistor studs, and the equipment used to apply, assemble and weld these items.
Through years of design, engineering and manufacturing excellence, we have perfected the
durability of our fastener products for use in high stress environments from applications such as offroad
construction equipment, large expansion bridges and skyscrapers to high performance autos,
nuclear power plants and equipment used in high temperature environments

 

Manufacture of Shear Connectors Welding Studs

Manufacture of Shear Connector Studs for ARC Welding

Manufacture of ISO 13918 Shear Connectors Welding Studs

Manufacture of ISO 13918 Shear Connectors

Manufacture of ISO 13918 Shear Studs

Manufacture of ISO 13918 Welding Studs

Manufacture of AWS D1.1 Shear Connector Welding Stud, Shear Stud, Welding Stud

Manufacture of AWS D1.5 Shear Connector Welding Stud, Shear Stud, Welding Stud

Stockholder of Shear Connectors Welding Studs

Stockholder of ISO-13918 Shear Connectors Welding Studs

Stockholder of Shear Connector Studs for ARC Welding

Stockholder of ISO-13918 Shear Connectors

Stockholder of ISO-13918 Shear Studs

Stockholder of ISO-13918 Welding Studs

Stockholder of AWS D1.1 Shear Connector Welding Stud, Shear Stud, Welding Stud

Stockholder of AWS D1.5 Shear Connector Welding Stud, Shear Stud, Welding Stud

Distributors of Shear Connectors Welding Studs

Distributors of Shear Connector Studs for ARC Welding

Distributors of ISO 13918 Shear Connectors Welding Studs

Distributors of ISO 13918 Shear Connectors

Distributors of ISO 13918 Shear Studs

Distributors of ISO 13918 Welding Studs

Distributors of AWS D1.1 Shear Connector Welding Stud, Shear Stud, Welding Stud

Distributors of AWS D1.5 Shear Connector Welding Stud, Shear Stud, Welding Stud

 

Description
SHEAR CONNECTOR (SHEAR STUD)
The simplest solution for transferring forces in expansion joints is to use the shear connector .

An economical option is to use mild steel shear connectors as energy dissipating.

Shear connectors also named shear studs, concrete anchors, are typically used in composite steel construction to tie the concrete to steel members and resist shear forces between the concrete slab and steel members. They are widely used in steel building, bridges, etc. Welding Through Metal Deck are available for this stud, for this option, special ceramic ferrule type UFT are recommended.

Shear connectors meet the following standards as below.
ISO 13918: 2008: 2008 Welding – Studs for arc stud welding, type SD1
AWS D1.1: 2015 Structural Welding Code – Steel, type B
AWS D1.5: 2002 Bridge Welding Code, type B
AS/NZS 1552.2: 2003 Australian/New Zealand Standard – Structural Stud Welding
BS 5400: 2005 Steel, Concrete and Composite Bridges
GB/T 10433: 2002 Cheese Head Studs for Arc Stud Welding
JIS B 1198-1995 Headed Studs

Composite Steel Flooring Construction Headed Shear Connector Studs
Shear connector studs are made of a material suitable to be welded by arc melting.The dimensions and design of the connector are in accordance with the BS - EN ISO13918:2008.

Main Features

1. Shear Connector Studs are designed to tie the concrete to the steel beams and to resist shear loadings between the concrete slab and steel beam in composite construction. 
2. Shear studs are used in stud welding to secure steel framed buildings to create a shear connection between the steel and the concrete. We supply and fix all available sizes of welded shear studs for through deck and straight to steel welding.
3. All our products meet the current standards and specifications.

Mechanical Properties of Shear Stud Connector

Standard

Tensile strength

Yield strength

Elongation

BS EN ISO 13918 SD1

≥450MPa

≥350MPa

≥15%

AWS D1.1

≥450MPa

≥350MPa

≥15%

BS 5400

≥495MPa

≥385MPa

≥18%

Chemical Component of Raw Material (%)

Material

C

Si

Mn

P

S

Al

SWRCH15A

0.13-0.18

≤0.10

0.30-0.60

≤0.035

≤0.035

≥0.020

SWRCH18A

0.15-0.20

≤0.10

0.60-0.90

≤0.030

≤0.035

≥0.020

Q345D

≤0.18

≤0.50

≤1.70

≤0.030

≤0.025

≥0.015

The Process
Electric-Arc stud welding is the most common process and is utilized whenever metal is fabricated. It
is used to best advantage when the base plate is heavy enough to support the full strength of the
welded studs, but is sometimes used with lighter gauge material.
The Stud is held in the welding gun with the end of the stud placed against the work. The cycle is
started by depressing the trigger button start switch. The stud is then automatically retracted from
the work piece to establish an arc. The arc continues for predetermined period of time until portions
of the stud and the base plate have been melted. Then, the welding gun automatically plunges the
stud into the molten pool of metal and holds it there under spring pressure. At the same time, the
welding current is stopped and, when the molten metal solidifies, the weld is completed and the
welding gun is removed from the stud.
The molten metal is held in place by a ceramic ferrule which also serves to shield the arc. The weld
metal is deoxidised by a flux in the weld end of the stud. This results in a dense, strong weld which
will develop the full strength of the stud and base plate. The weld cycle depends on the diameter of
the fastener and materials being joined and varies in time from 1/10 to 1-1/2 seconds. Welding
currents range from 250 to 3000 amps.

Welding Thru deck
The best welding results are achieved through adherence to recommended job-site procedures and
conditions. Factors such as painted beam flanges, water, deck fit-up to the beam, and inadequate
power can seriously hamper satisfactory welding.
Here are some important site requirements:
 Top flanges of beams must be unpainted (or at least a strip where the studs are to be
welded).
 Remember if fire protection coating is applied to the rest of the beam (top uncoated) prior
to stud welding, that touch up may be required after the studs have been welded. (The heat
from stud welding may activate the fire protection)
 The beams should be free of heavy rust and mill scale
 The beams should be free of dirt, sand and other materials
 Ga anised beams will need to be ground back to remove the ga anising
 Water on the deck, or between the beam and deck must be removed before welding

Shear Connectors
Shear connectors deliver code specified shear strength values as used in composite
construction, securing concrete to steel structural components. Nelson shear connectors meet
requirements of the following codes:
AS/NZS 1554.2 Structural steel welding Part 2: Stud Welding (steel studs to steel)
 AWS D1.1 Structural Welding Code – Steel
 AWS D1.6 Structural Welding Code – Stainless Steel
 AWS D1.5 Structural Welding Code / AASHTO Standard Specification for Highway Bridges
 Canadian Standards Association W59 – Welded Steel Construction
 AISC Manual of Steel Construction – Allowable Stress Design
 AISC Manual of Steel Construction – Load & Resistance Factor Design
Shear connectors are typically used in composite steel construction for holding concrete slabs to
steel members to resist shear forces and increase shear loading capacity in steel buildings, bridges,
columns caissons, containment liners, etc. They also act as embedment anchors on miscellaneous
embedded plates, frames, angles, strip plates, attachments and connections.

Short form specification
To ensure that certified products are used, the following specification is s ested. “Headed anchors
shall be Shear Studs, flux filled welding to plates as shown on drawings. Studs shall be made
from cold drawn steel Grades to I C -1010 through C – 1020 per ASTM A-108 and shall be welded per
manufactures recommendation”


Shear capacity
Headed shear studs embedded in concrete with an embedment length more than four times their
diameter are capable of developing full shear capacity. Spacing is not as sensitive in shear as in
tension. Spacing four times diameter between studs in plane perpendicular to the shear force and
six times diameter in the direction of the shear force is generally adequate to develop full stud
capacity. Free edges in the direction of the shear force and some spacing restrictions along a free
edge apply. Use proper safety factors and edge reinforcement.

An upper bound limit for headed studs as approached at 0.9 As fs when concrete strength exceeds
35Mpa
Headed studs used as inserts have different values than those employed in composite design. For
shear capacity of studs in composite design with or without metal deck see appropriate code and
commentary.

Shear Connector Weld Studs are unthreaded with an upset head.
Designed to interconnect the concrete slab to the load bearing steel beams.
Because of the inter connection or composite construction resists shear loading 
between the concrete and steel beams. Meets with AWS and all other applicable 
specifications. Used in all types of concrete connections.

They can be welded to flat or vertical surfaces, or to the inside or outside of an angle.
Material – Low carbon steel, ASTM A29, 1010-1020. Also available in a weldable stainless steel.
Type 302 is the most commonly used. Other grades available on request.
Please contact us for your specific needs.

Length: Length listed is before weld. Stud diameters less than 5/8” will be 
approximately 1/8” shorter after weld – Stud diameters 5/8” – 3/4” will be 
approximately 3/16” shorter – Stud diameters 1” will be approximately 1/4” shorter after weld.

Benefits of Using Shear Connector Weld Studs
Speed, applying a stud takes less than a second
Single sided, no access to the opposing side needed
Strong, creates a full cross section weld
Stable, will not work itself free like a pres-in fastener
Speed of training, no special skills and very little training needed to install

 

Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN 10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0103 / NACE MR-0175 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-WO, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2015, API 6A (American Petroleum Institute), with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3                   
 

If you have any requirement of above items, please feel free to contact us


Regards,


CONTACT PERSON :

 


MUKESH SHAH                   
Director                    
Mobile No. 0091 - 9820292499                    
Email - 
marketing@rolexmetals.com


ROLEX METAL DISTRIBUTORS                    
( A METAL & STEEL Company )                    
57-A, KHATARGALLI,                    
THAKURDWAR,                    
MUMBAI - 400002, INDIA.                    
TEL.No. 0091-22-23858802                    
TEL.No. 0091-22-23823963                    
FAX No. 0091-22-23898724                    
Email - 
marketing@rolexmetals.com                    
Website – www.rolexmetals.com

                    
 

CHAIRMAN – chairman@rolexmetals.com

MANAGING DIRECTOR – managingdirector@rolexmetals.com

TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com

SALES DIRECTOR – salesdirector@rolexmetals.com

COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com

 

COMMERCIAL MANAGER – commercial@rolexmetals.com

GENERAL MANAGER – generalmanager@rolexmetals.com

SALES MANAGER – salesmanager@rolexmetals.com

PURCHASE MANAGER – purchasemanager@rolexmetals.com

TECHNICAL MANAGER – technical@rolexmetals.com

WORKS MANAGER – worksmanager@rolexmetals.com

STORES MANAGER – stores@rolexmetals.com

WAREHOUSE MANAGER – warehouse@rolexmetals.com

SALES DOMESTIC – salesdomestic@rolexmetals.com

SALES INTERNATIONAL – salesinternational@rolexmetals.com

SALES GENERAL – sales@rolexmetals.com

PURCHASE GENERAL – purchase@rolexmetals.com

FINANCE MANAGER – finance@rolexmetals.com

ACCOUNTS MANAGER – accounts@rolexmetals.com

GENERAL INFORMATION – info@rolexmetals.com

 

EXPORT MANAGER – export@rolexmetals.com

IMPORT MANAGER – import@rolexmetals.com

AIR EXPORT – airexport@rolexmetals.com

SEA EXPORT – seaexport@rolexmetals.com

CUSTOMS – customs@rolexmetals.com

 

AIR FREIGHT – airfreight@rolexmetals.com

SEA FREIGHT – seafreight@rolexmetals.com

DESPATCH – despatch@rolexmetals.com

INSPECTION – inspection@rolexmetals.com

LOGISTICS – logistics@rolexmetals.com

TRANSPORT – transport@rolexmetals.com

 

KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com

TALOJA WAREHOUSE – taloja@rolexmetals.com

KHOPOLI WAREHOUSE – khopoli@rolexmetals.com

NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com

KANDLA WAREHOUSE – kandla@rolexmetals.com

MUMBAI WAREHOUSE – mumbai@rolexmetals.com

STOCKYARD – stockyard@rolexmetals.com

 

SERVICE – service@rolexmetals.com

SUPPORT – support@rolexmetals.com

RECRUITMENT – career@rolexmetals.com

WEBMASTER – webmaster@rolexmetals.com

CUSTOMER CARE – customercare@rolexmetals.com

 

 


Product Image

Shear Connectors Welding Studs ISO 13918 1
Img 1
Shear Connectors Welding Studs ISO 13918 2
Img 2
Shear Connectors Welding Studs ISO 13918 3
Img 3
Shear Connectors Welding Studs ISO 13918 4
Img 4
Shear Connectors Welding Studs ISO 13918 5
Img 5
Shear Connectors Welding Studs ISO 13918 6
Img 6
Shear Connectors Welding Studs ISO 13918 7
Img 7
Shear Connectors Welding Studs ISO 13918 8
Img 8
Shear Connectors Welding Studs ISO 13918 9
Img 9

Send Inquiry to this Member

ROLEX MATERIALS CORPORATION

57-A, KHATARGALLI, THAKURDWAR

Phone:
91-22-23858802
Fax:
91-22-23898724
Contact:
MUKESH SHAH (DIRECTOR)
Mobile:
0091-9820292499

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Construction Materials Stocks Made In China Products

,  

Construction Materials Stocks China Suppliers and China Manufacturers