600 Kw Natural Gas Generator Set
Product Description
Natural gas generator sets are new generator sets developed for the world's environments protection requirements and new environments of market.Mainly there are two kinds of gas generator sets,one is combined-cycle gas turbine,while the other is gas internal combustion engine.Combined-cycle gas turbine has a bigger power,mainly applied in large and medium power stations,while gas engine has a smaller power,mainly applied in small distributed power stations.As a new green power,the natural gas generator sets take the place of oil-fuel unit and coal-fired unit.
Advantages of natural gas generator sets from Sinodec
Mature and stable technology
International quality system certification
10kw to 1000kw various models
Technical Parameter of 600KW Gas Generator Set
| Generator Set |
Type |
600GF-T |
| ekW |
600 |
| ηel(%) |
38 |
| LxWxH(mm) |
5357x1970x2689 |
| Weight(kg) |
13000 |
| Engine |
Type |
T12V190ZL-2A |
| BorexStock(mm) |
190x210 |
| Displacement(L) |
71.45 |
| Speed (rpm) |
1000/1500(50Hz) |
| Speed (rpm) |
1200/1800(60Hz) |
| Starting Mode |
24V DC Electric starting system |
| Cooling Type |
Vertical fan water tank/heat exchanger/multiple fan water tank |
| Governing Type |
Electronic governor |
| Alternator |
Type |
1FC6 457-6 |
| Rated Voltage (V) |
400/230 |
| Current (A) |
1083 |
| Power Factor |
0.8(Lagging) |
| Phase and Connection |
3 phases 4 wire, Y-connection |
| Excitation |
Brushless |
| V-regulator |
Automatic |
| Control Panel |
Feature |
Powered by 24 volts DC , degree of protection IP54, lockable hinged door, start/stop control switch, Voltage adjustment |
| Data View |
RPM, operating hours, total generating capacity, oil pressure, coolant temperature, DC voltage, Hz,ekW, frequency , voltage ,pf, exhaust temperature, Engine cylinder temperature,Speed |
| Protection Function |
Low oil pressure; high coolant temperature; high oil temperature, overspeed, emergency stop, under/over voltage, under/over frequency, overcurrent reverse power, |
| Spare |
Spare indicator LEDs, spare alarm/shutdown inputs |
Requirements for biomass gas
| No. |
Gas component |
Range |
| 1 |
Temerature |
≤40° |
| 2 |
Pressure |
80kpa-200kpa |
| 3 |
Pressure variation rate |
≤1kpa/min |
| 4 |
CH4 content |
≥70% |
| 5 |
H2S content |
≤20mg/Nm3 |
| 6 |
NH3 content |
≤20mg/Nm3 |
| 7 |
Impurity size |
≤5μm |
| 8 |
Impurity content |
≤30mg/Nm3 |
| 9 |
Moisture content |
≤40mg/Nm3 |
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
