| Model: | JW1260100 |
|---|---|
| Brand: | JINWO |
| Origin: | - |
| Category: | Electronics & Electricity / Battery, Storage Battery & Charger |
| Label: | 12V 60Ah li battery , 12v lithium battery , 12v lifepo4 battery |
| Price: |
-
|
| Min. Order: | 1 pc |
| Live Chat: | Last Online:20 Oct, 2023 |
LiFePO4 12V 60Ah Lithium iron Phosphate battery Pack / Lipo 12V 60Ah
Quick Detail:
1. Built-in automatic protection for over-charge, over-discharge and over-temperature conditions
2. Intra-module balancing
3. Maintenance-free
4. Thousands of cycles, under normal conditions
5. Can be charged using most standard lead-acid chargers
Description:
We can design any 12V LiFePO4 with the same SLA case size to replace old SLA battery! Tongyu provide the best price with high quality products, can accept small orders.
Maintenance-free
No memory effect
Low self discharge and longer service lifespan
High discharge rate
Wide operation temperature range
Advantage of lifepo4 battery:
Applications:
Specifications:
|
Item |
JW1260100 |
|
Nominal Capacity |
60Ah |
|
Nominal Voltage |
12.8V |
|
Normal discharge current |
50A |
|
Maximum continuous current |
100A |
|
Max pulse instant current |
150A |
|
Discharge cut-off voltage |
10V |
|
Max charge voltage |
14.6V |
|
Charge current |
≤50A |
|
Battery housing |
ABS 12V 50Ah SLA Case |
|
Charge temperature |
0℃~45℃ |
|
Discharge temperature |
-20℃~60℃ |
|
Humidity |
5%≤RH≤85% |
|
Size(L*W*H) |
229*138*210mm |
|
Weight |
<7.5kg |
|
Protection function |
Overcharge protection, Over discharge protection, Over current protection, Temperature protection, Balanced function |
Lithium battery 12V 50Ah Electrical Characteristics & Test Condition
@Testing Conditions: Ambient Temperature: 25±5℃; Huminity:45%~75%.
| NO | Items | Criterion | Condition | |
| 1 | Internal Impedance | ≤20mΩ | Test the internal resistance of 50% SOC battery pack with 1 kHz AC internal resistance test instrument. | |
| 2 | Capacity | ≥60Ah | Rest for 1 hour after fully charged, then discharge with 0.33C current until the battery reaches the discharge cutoff voltage. Repeat above process for three times, if the discharge time is not less than 180 minutes, you can stop and define the Discharging current*time value (Ah) as battery capacity. | |
| 3 |
Cycle life (DOD%100) |
≥2000cycle | Discharge with the current of 0.5C until it can’t discharge, and then rest it for 1h. Charge the battery following CC(0.33C)/CV(14.6V) mode to full capacity, and then rest it for 1h. Repeat above process until full charged capacity is no more than 80% of normal value. Accumulated times is defined as cycle life. | |
| 4 |
Discharge Temperature Characteristics |
-20℃ | ≥70% | At 25±5℃ discharge the battery with the current of 0.33C to the cut-off voltage. Store the battery at various temperatures for 2h and discharge the battery with 0.33C to the cut-off voltage. Record the ratio between discharging & charging capacity. |
| 0℃ | ≥80% | |||
| 25℃ | 100% | |||
| 55℃ | ≥95% | |||
| 5 | Charge Retention ability | remain capacity≥90% | Charge the battery to full capacity and store it for 28days, and then discharge it with 0.33C to the cut-off voltage. | |
You can now replace the lead acid (SLA , AGM or GEL) batteries with these modern LiFePO4 batteries and see the difference in the performance immediately!
The size is the same, the performance and service-life is much better!
Compared with Seal lead acid battery, lifepo4 battery has many advantages:
1. Green: Non-Toxic, comfort to RoHS.
2. Long cycle life: > 2000 cycles, while Sealed Lead Acid batteries only 750 cycles and NiMh batteries only 500 cycles)
3. Safety
The safest battery in the world till now, which does not burn with 30V charge voltage and it does not explore when you puncture the battery. UL approved.
4. Light weight and smaller dimension
The dimension is smallest and the weight is lightest when compare with other battery. 1/3 weight of SLA, 65% weight of NIMH.
5. Great capacity and more powerful, rechargeable battery
High discharge current, 1C continuous, 3C pulse for normal cells and 20 C for special design
We can install many single cells in series and in parallel and it can fully discharge
6. Good thermal stability: - 40°C to 70°C
7. Back fast charge, good consistence, no memory effect, can equip battery charger.
Can be recharged anytime, no reduction of the capacity
8. Widely application, customize solutions, mass production, OEM/ODM/buyer label provided.
Typical Application:
Communication base station
Power monitoring,Portable applications
billboard,Patrol car
Automotive application
Electric forklift
Solar street lamps
UPS power supply
Household energy storage
Hydrological monitoring
Product's picture
| Model | JW12V |
| Battery Type | Lithium ion Battery(Lead acid replacement battery) |
| Voltage | 12V |
| Capacity | 4.5Ah, 7Ah, 7.5Ah 8Ah, 9Ah, 10Ah, 12Ah, 15Ah |
| 17Ah 18Ah, 19Ah 20Ah, 24Ah, 30Ah 40Ah 60Ah 100Ah | |
| Brand Options | JINWO, neutral or customized brand |
| Cycle life | >2000times
|
| Warranty | 12 months |
| Package | Individual box package |
Our Services
- A professional sales team which provide consultant service and the most competitive battery solutions.
- OEM and ODM designs and lables are welcome.
- Small Order is available.
- Wide-range battery products to satisfy different customer’s requirement.
- Quick response, every inquiry will be replied within 24 hours.
- Good after-sale service, long product warranty and continual technique support
Contact us
|
Send your inquiry to us and you will get: |
|
Send inquiries at below NOW ⇓
|
Welcome to visit our company any time !
We are ISO certified factory!
