Home > Products > Transportation > Car Accessories > Car Communications

Yanhua Mini ACDP Programming Master Wifi work on Android/IOS Support CAS1/CAS2/CAS3/CAS3+/CAS4/CAS4+/FEM/BDC Key Programming/Read DME ISN Code by OBD


Top reasons to get ACDP programming master for BMW Key and Mileage. 

1. Via OBD to work for BMW E series key programming and mileage correction,
2. Without soldering to work BMW F series key programming and mileage correction. 
3. Support CAS1/CAS2/CAS3/CAS3+/CAS4/CAS4+/FEM/BDC 
4. WiFi work on Android and iOS.  Bluetooth work on Windows 7 and Windows 10. 
5. Easy to operate, even no experience at soldering and key programming.
 

Yanhua Mini ACDP Highlights:

Test car NO longer needs engines
YANHUA car keys programming NO longer need soldering iron
Car locksmith NO longer needs soldering work.
The first in the world programming no need soldering


Yanhua Mini ACDP Functions

1. Memory programming:
Support 93/24/25/35/95 series EEPROM in circuit (ICP)and on board(OBP)programming and parts of Freescale/ NEC MCU in circuit programming(ICP).

2. BMW module programming:
(1) Support cas1-cas4+and FEM/BDC IMMO key programming, mileage reset, program recovery.
(2)BMW engine ECU data reading and ISN code reading
 
3. VW module programming. MMC instrument
4. Instrument mileage and airbag ECU reset/maintenance is under development.
5. BENZ. BMW Audi and various models are upgraded successfully


Yanhua Mini ACDP IMMO/Mileage Programming

No need to remove chip
No need soldering
No need to cut the line
No need to lift the pin
 
BMW: CAS4/FEM/BDC/16ODOWT

Solder-free programming Data safety

WIFI Free connection with android and iOS system
Bluetooth connection with Windows system

1. Overturn the traditional work mode, single operation is changed to team cooperation
2. Change of operation mode, PC operation is changed to mobile phone operation
3. Change of test connection mode, electric soldering iron is changed to no-solder dedicated connector
4. Change from artificial observation to intelligent monitoring Artificial observation / trying is changed to automatic detection algorithm, grap hical in dication the relability of connection.
Ensure the data is not damayed and lost
5. Change of service mode: Offline service is changed to online synchronous service

A game changer for BMW Key Programming
1. CAS4/CAS4+ Key Programming Without Soldering or removing component.
2. FEM/BD.C Key Programming without Soldering/Welding
3. Read ISN Code from OBD Port directly(Partially)


BMW CAS-CAS3+ Key Programming by OBD (Buy YK10-1 Module Separately):
Read CAS EEPROM
Add Keys
Reset Mileage
Back up or recover CAS
All keys Lost

BMW CAS4/CAS4+ (Buy YK10-1 Module Seperatly):
Read CAS4 EEPROM without soldering/welding
Add Keys without soldering/welding
Reset Mileage without soldering/welding
Back up or recover CAS without soldering/welding
All keys Lost without soldering/welding

FEM/BDC (Buy YK10-2 Module Seperatly):
All keys lost without soldering/welding
Add keys without soldering/welding
Delete Keys without soldering/welding
Enable/Disable keys without soldering/welding
Read Key ID
Repair/Replace FEM Module without soldering/welding
Reset Mileage without soldering/welding

Read and Write ISN Code (Buy YK10-3  Module Separately) :
N20(mevd1724, mevd172P, mevd1729), N13(mevd1725, ), N55(mevd172, mevd1726, mevd172G, mevd172S, MEVD17, ), MSV80, MSD81, MSD85, MSD85HY, MSD87, MSV90, MEVD1728(s63), mev1722, med172, mevd1727, dde701_edc17c50, BMSX….

BMW 35080, 35160DO WT Read & Write (Buy YK10-4 Module Separately)
Read and write BMW M35080, 35160DO WT etc EEPROM

Fujitsu CPU MB91F Read & Write Module (Buy YK10-5 Module Separately)
Supports Honda FIT, Vezel, Fifth generation Hyundai Sonata, Kia K3/K5 etc Fujitsu CPU MB91F series read & write function. 

Note: You can install the software in Android and iOS system (WiFi connection with the device)
          And Windows 7, Windows 10 system (both 32 bit and 64 bit, Bluetooth connection,  you need to buy the additional bluetooth adapter)

 Package List:

1pc x ACDP Programmer Master
1pc x OBP+ICP adapter
1pc x Puncture socket
1pc x P8P ribbon cable
1pc x 8P cable
1pc x 20P cable
1pc x P CAN cable set
1pc x 12V power adapter 
3pcs x paint surface cleaning needles (1.0mm,0.8mm,0.5mm)