|Origin:||Made In China|
|Category:||Industrial Supplies / Metallurgy Machinery|
|Label:||Black Annealing , Annealing Machines , On-line Black Anneal|
|Min. Order:||1 pc|
Pipe Diameter: 6mm-762mm
Material: 300series austenite, 400 series ferrite, dual-phase steel
Power supply: 60KW--1500KW
Note: According to pipe diameter、thickness and production speed to match power.
Package: suitable for shipment
Black Annealing Equipment
HHS style black annealing equipment specializes in heating steel pipe to bright annealing treatment temperature then cooling it to indoor temperature by water spray. Advanced inductor heating power is new type DSP＋IGBT structure energy-efficient production, it is
IGBT inversion and adopts DSP to do full digital accurate control. Full air cooling structure (inductor water cooling) reduces system loss. It has set through self-protection and self-diagnostic function. It can save about 15% energy than congeneric product.
Induction heating coil for brass solenoid structure. Heat treatment time is short, putting the steel tube heat from room temperature to 1050 ℃ with only 10 seconds.
In induction heating channel exit, is equipped with an infrared thermometer, which is used to measure the temperature of the steel pipe. Thermometer and temperature display meter and regulator, can set alarm temperature as required.
SEKO Machinery series inverter uses the voltage feedback type, its logo is at the inverter side into the line end uses a filter capacitor, and uses the string type resonant load, inverter can start below the resonance point. The inverter is also an important characteristic is its internal string circuit isolated inverter with load, the power from the load caused by short circuit fault. At the same time, 100% of the electric current flows through the load coil and inverter, thus can only control the frequency of the inverter to control the output power, frequency of adjustment will drive power of minimax changes.