Home > Products > Chemicals > Coatings, Varnish & Painting

Typical Application Of Coating
Wind turbine blade putty, primer, top coating
Construction Method
Air spray, airless spray, roller coating
Use Note
It can be natural dry or barking dry and used after 5-10 minutes of mixed.
• must use the specific diluent dilution, the spray viscosity depends on the construction site conditions.
• The curing agent is easy to react with the moisture, then, the curing agent should be sealed after use, if not, the curing agent is easy to gel.
• Construction can be sprayed at one time or multi-channel spraying construction, if the interval of more than 48 hours, before spray, must use sandpaper to sand.
• Construction site should have good ventilation, dust removal device to ensure the construction quality.

• Construction workers are required to wear the necessary labor protection products.

Related cases

Successful Case Of Wind Power Industry