Home > Products > Industrial Supplies > Other Industrial Supplies

Technical Parameters

Model:LY-1500

Packing size:24*24*38cm

Weight:10kg

Fineness:60-300μ

Rotating speed:28000r/min

Capacity:800g,1000g,1500g

Power:2500w

Voltage:220 V/110V

2.Description: 

This model of grinder is applicable of herb grinding, health care products grinding, food grinding used in clinic, hospital pharmacy shop, Laboratory and family etc. also it can be used for lady herbal mask.

It can grind green bean, rice, wheat, sorghum, corn, chili, soybean, walnut, sesame, jujube and pepper etc. it only take hal minute to finish.

This machine is not only ideal grinder for food and herb but also ideal grinder for pearl, chemical, mineral, soil, grain, coal, and other experimental material.

It only take one minute to grind kinds of pellet to powder(60-300 meshes), uniform and no-loss.

3,Operating method:

Please turn off the power switches before use this machine

1.Open the upper cover( clockwise close, and counterclockwise open).

2.Put the dry herb into the crushing box.

3.Tighten the upper cover.

4.Plug in and open timer switch.

5.When you hear the voice of uniform rolling, that is say the herb  has been grinded into powder.

6.Open the cover and pour out the powder.
 
 4,Attention:

1.Please pre-dry and small quantity and short time when grind sesame(with oily) and ice-sugar(with viscosity), you can grinder for more times to avoid the machine to hot.

2.Don’t wash the machine with water, you can clean the machine by cloth or brush.

Moist products(meat and fruit) and excess quantity products is forbid.

3.Don’t let the material exceed half of the box.

4.Normal material only need 1-2minute, tough material need 8 minutes.

5.This machine can not running for long time, the maximum time is no long than 5 minutes.

If need grind bulk material, please run the machine interval.

1.Don’t open the power switch when the cover is open.

2.After long time use, you should check the carbon brush and blade, if wear out, please change.

3.Please check the screw of blade is tighten.