Home > Products > Chemicals > Adhesives & Sealants

Method for making the Glue
Process:
1. Water: 2KG.
2. Glue powder: 1kg (1 bag), put into the water and mix up.
3. 96% caustic Soda 0.035kg (in Winter), 0.03kg (in Summer), and borax 0.02-0.025kg, add into 0.6kg water, fully solved, mixing and reacting for 5 ~ 10mins. Then pour the solution into the well mixed glue solution, mixing up during the pouring. (Note: When making the glue, be sure to control the quantity of Caustic Soda based on the quality of Caustic Soda.)
4. Tributyl phosphate (AR grade) : 1 cap (Use the cap of the bottle is ok), about 30ml. Pour into glue solution and mix up. (Note: This product is mainly used as a defoamer, please don’t add too much, or it will effect the viscosity of the glue.)


Method for making the Glue
Process:
5. Water: 2KG.
6. Glue powder: 1kg (1 bag), put into the water and mix up.
7. 96% caustic Soda 0.03kg (in Winter), 0.027kg (in Summer), and borax 0.013-0.015kg, add into 1kg water, fully solved, mixing and reacting for 5 ~ 10mins. Then pour the solution into the well mixed glue solution, mixing up during the pouring. (Note: When making the glue, be sure to control the quantity of Caustic Soda based on the quality of Caustic Soda.)
8. Tributyl phosphate (AR grade) : 1cap (Use the cap of the bottle is ok), about 30ml. Pour into glue solution and mix up. (Note: This product is mainly used as a defoamer, please don’t add too much, or it will effect the viscosity of the glue.)