Stator coil pre-forming machine
Product Description
Stator Coil Pre-forming Machine is driven by hydraulic system; PLC programming; tooling expansion slice
makes the first coil and inter-phase insulation paper in slot adjacent,
leaving enough space for second insertion and ensure the quality of
successive coil insertion; apply to multi-layer stator winding
insertion.
Technical parameter:
Stator I.D
30~100mm
Max stator O.D
160mm
Thickness of stator lamination
15~100mm
Displacement of oil pump
20F
Power supply
380V/50/60Hz
Machine productivity
around 1500pcs/8 hours
Weight
800KG
Dimension
1200mm700mm2200mm
Machine main function and characteristic
This machine adopts whole hydraulic system and PCL program.
This machine can adjust the forming stack length by changing washer.
Form the OD, and ID of the stator core coil without forming hang over to facilitate operator to put phase isolator.
After forming, there is no copper wire enamel broken or wire snape
Changing a new tooling is easy and convenient.
Both
slot paper and wedge should not be damaged or turned over. The stator
should not be deformation or stator lamination should not be upward.
There is no wire enamel broken.
Production capacity 15s/set (exclude loading/unloading time)
Primary qualification rate 99%, after rework, the rate 99.9%
This machine adopts safety grating protection system. Operator need to stand when operating.
Machine adopts two hands simultaneously start button to ensure safety.
http://www.nide-auto.com
Product Image
Img 1
Img 2
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,