Home > Products > Electronics & Electricity > Insulation Material

TP120 is one kind of basic thermal conductive pad.Silicone type with soft rubber material.Thermal silicone pad is a very cost-effective general economic thermal gap filling gasket, soft with its own micro-stick, easy assembly.

Under low compressing force to show good thermal conductivity and electrical insulation properties. Bedding on the gap between the heat device and the heat sink or the machine shell to extrude air to reach the full contact forming a continuous thermal conduction.Using heat sink or machine shell as a cooling device can effectively increase the cooling area to achieve a good cooling purposes.

Tips:

1.The original size is 200mmx400mm, 300mmx400mm and it is decided by the machine.However, it can die-cut to any size by machine again. So we can offer you the different size you need.

2.As for color, the general is grey and white.If you need other color,please tell me.

3.As for thermal conductivity,if you need others,also please let me know.

 Usage

 Step 1

Clear the surface where you are going to paste the thermal pad; 

 Step2

Tear the protective film of one side and remember do not tear the protective film of both sides in the same time to reduce the contact times and scare of the thermal pad avoiding the damage of thermal pad stickiness and thermal conductivity. 

 Step3

Paste the side without protective film on the products, then tear the other side protective film, then install your electronic components on the thermal pad. After installation, press slightly and let it stay for a while to ensure the thermal pad fixed well. 

If you are interested in this type or need other types pls do not hesitate to contact me for more details.

Sky-ever welcome your inquiry, click here ! www.sky-ever.com