| Model: | UM-1 Series |
|---|---|
| Brand: | YUSHI |
| Origin: | - |
| Category: | Industrial Supplies / Electrical & Electronic Product Equipment |
| Label: | thickness gauge , thickness meter , thickness tester |
| Price: |
US $467
/ pc
|
| Min. Order: | 1 pc |
| Live Chat: | Last Online:05 Dec, 2017 |
Digital Thickness Gauge Portable Ultrasonic Thickness Gauge for Metal
Product Description
UM series ultrasonic thickness gauge is extremely suitable for measuring the pipes about their thickness lose after corrosion.
Each instrument has been calibrated by 34 standard test blocks before delivery to ensure the accuracy of the measurement.
Optional USB Port or Serial RS232 Port.
Main Comparison Between Different Models
| Model | UM-1 | UM-1D | UM-2 | UM-2D |
| Operating Principle | Pulse-Echo |
Pulse-Echo Echo-Echo |
Pulse-Echo |
Pulse-Echo Echo-Echo |
| Measuring Range in Standard Mode |
0.8mm-300mm(Depend on material and probe) |
0.8mm-300mm(Depend on material and probe) | 0.8mm-300mm(Depend on material and probe) | 0.8mm-300mm(Depend on material and probe) |
| Measuring Range in Thru Coating Mode | × | 3mm-20mm | × | 3mm-20mm |
| Measuring Resolution | 0.1mm, 0.001inch | 0.1mm, 0.001inch | 0.01mm, 0.0001inch | 0.01mm, 0.0001inch |
| Probe Compensating Line | 1 built-in probe compensating line | 1 built-in probe compensating line | 7 built-in probe compensating line | 7 built-in probe compensating line |
| Data Logger | √ | √ | √ | √ |
Product Specification
| Display Type | 128×64 dot-matrix LCD screen with EL backlight |
| Operating Principle | P-E (pulse-echo) with dual-crystal probes |
| Measuring Range | 0.8mm-300mm, depend on material and probe |
| Measuring Limits of Tube(Steel) |
Φ20mm × 3.0mm (PT-08 probe) Φ15mm × 2.0mm (PT-06 probe) The measuring error is up to ± 0.1mm |
| Measuring Error |
Low limit to 10mm: ±0.1mm 10mm to high limit: ± ± (1%H+0.1) mm Note: H is the actual thickness of the testing material |
| Repeatability | 0.1mm |
| Display Resolution | 0.1mm, 0.001inch |
| Units | Inch or Millimeter |
| Calibration Method | Zero calibration, Two-point calibration |
| V-Path Correction | Automatic |
| Update Rate | 4Hz |
| Material Velocity Range | 1000~9999m/s (0.0394 to 0.3937in/μs) |
| Memory Function | 5 arrays are divided to store 500 thickness values |
| Minimum Value Checking | Move the probe along the surface of the testing material, the gauge is able find the thinnest point automatically. |
| Warning Function | If the measured value exceeds the pre-set thickness limit, the warning tone will start. |
| Velocity Storage | Velocities of 5 different materials can be stored totally |
| Languages | English and Chinese |
| Communication Port | USB port or Serial RS 232 port (Optional) |
| Application Software | UmView Software for transmission,storage,analysis and documents editing (Optional) |
| Power Requirements | Two 1.5V AA alkaline batteries (Warning with low battery voltage) |
| Operating Time | Up to 200 hours with alkaline batteries (without backlight) |
| Instrument Shut-off | AUTO OFF after 5 minutes of inactivity |
| Operating Temperature | -10 °C to +50 °C , -20 °C in special requirements |
| Size | 149mm X 73mm X 32mm(H X W X D) |
| Weight | 210g including batteries |
Optional Accessories
| High-temperature probe | Castiron Probe | Small Tube Probe | Fingertip Probe | Proble Cable |
| Step Calibration Block | Application Software | Data Transmission Cable | Rubber Sheath | Couplant and High-temperature Couplant |
Other Optional Probes
Standard Congfiguration
| Name | Quantity |
| Main Unit | 1 |
| Probe | 1 |
| Battery | 2 |
| Couplant | 1 |
| Carrying Case | 1 |
| Operating Manual | 1 |
|
Software |
1 (Optional) |
Appliaction
About Us
Shenyang Yushi Xianfeng Inspeciton Instrument Co; LTD. was founded in 1985, it is a professional enterprise specialized in developing, manufacturing Non-destructive Testing Instruments.
Our Factory Director Mr. Wang paticipates the research and development personally, who has already acquired many patents as well. We produce 7 sorts of products, which are Ultrasonic Thickness Gauge, Coating Thickness Gauge, Black-white Densitometer, Leeb Hardness Tester, LED Industrial Film Viewer, Ultrasonic Flaw Detector and X-ray Flaw Detector.
FAQ
Q:What’s your after-sales service and warranty?
A: We promise to bear the following responsibility when defective product is found:
1.12 months warranty from the first day of receiving goods;
2. Replacements would be sent with goods of your next order;
3. Refund for defective products if customers require.
Q:Do you accept OEM orders?
A: Yes, we provide OEM services to worldwide customers.
Q:What’s the MOQ?
A: MOQ is 10pcs for standardized products; for customized products, MOQ should be negotiated in advance. There is no MOQ for sample orders.
Q:How long is the lead time?
A: The lead time for single order is 1-3 days, for bulk orders is 3-10 days.
Q:How to place orders?
A: 1. Email us the model and quantity, consignee information, shipping way and payment terms;
2. Proforma Invoice made and sent to you;
3. Complete Payment after confirming the PI;
4. Confirm Payment and arrange production.
Contact Us
| Payment Terms: | CNF |
|---|---|
