|Origin:||Made In China|
|Category:||Chemicals / Resin|
|Label:||packaging adhesive , pu resin , pu glue|
|Min. Order:||2000 kg|
Type of Adhesive: General Grade, Two component so ent based(EA) polyurethane adhesive.
Application EN1075A/B is suitable for laminating :
Pre-treated PE films
Pre-treated PP films
Pre-treated PET films
Pre-treated PA films
Metalized films, etc.
So ent based adhesive EN1075A/B is an economical adhesive for the general range of flexible packaging, it’s suitable to use for transparent lamination as well as for triplex lamination. It can be applied at the high working solid which makes the product very economic. EN1075A/B has good machine ability and a good wettability.
It complied with US FDA 21 CFR175.105 .
|Appearance||Light yellow||Colorless or light yellow|
|Solid Content (%)||75±2||75±2|
|Mixing Ratio(By weight)||20||4|
Recommended Operating Conditions
Application Method Direct gravure
Application Cylinder 120-180lines
Application Solids 25-40%(recommend 35%)
Pot Life 8hours by dynamic, 24hour by static
Dry Coating weight 2.0-3.5gsm
Drying Section Temperature 50~60℃/60~70℃/70~80℃(three section)
Laminating Temperature 50~80℃ depending on films
Cure Time(before slitting) 24hours(50±5℃)
In order to obtain a certain solids, the following quantities of so ent(Ethyl Acetate) are recommended.
|EN1075A(kg)||EN1075B (kg)||EAC(kg)||Solid Content (%)||Viscosity,seconds
(25℃，Zahn Cup #3)
Ethyl Acetate, Acetone and Methyl Ethyl Ketone provided that the water content does not exceed 300ppm. Aromatic and alcoholic so ents are not suitable.
EN1175A is 20kg/drum, EN1175B is 4kg/drum.