Home > Products > Electronics & Electricity > Other Electrical & Electronic

                       CCR-6800 Automatic Diagnostic common rail and EUI EUP test bench

  CCR-6800 Multifunctional Diesel Fuel Injection Pump Test Bench
Characterized with full automatic control, performs maintenance tests for Euro III, Euro IV, Euro V injectors and high-pressure pumps very conveniently. With complete standard data, it is professional for testing thousands of injectors and high-pressure pumps including Bosch, Delphi, DENSO, Siemens, Caterpillar, etc. Equipped with original imported high precision flow sensors, it has functions as automatic oil measurement, automatic generation of fuel pump nozzle test reports, etc. 
       
EUI EUP Test Module & HEUI Test Module are optional to be added onto this all-in-one test bench. 
 
 
 
Product Characteristics 

1. Automatic Control    Click "Start" after installed the to-be-test high pressure pump or injector, this test bench will automatically adjust every working conditions and proceed the maintenance tests, measure oil quantity, generate test reports, determine eligibility; 
 
2. Accurate Data    Using BOSCH, DENSO, DELPHI original standard test bench data, test accuracy can reach the original level;  

3. Automatic Calibration    When testing a new injector, test bench can automatically adjust parameters of each working conditions according to its electrical characteristics, collect and save data, generate standard data for maintenance;  

4. Multiple Protection    Over-heating, over-voltage and over-load protections, oil tank fuel shortage tips, rail pressure too high protection, automatic shutdown when operating room cover is open, six filters protection, etc.
 
 
 
Injector Experiment   

1. Equipped with Bosch original imported CP3 pump and high pressure rail with DRV, it can test 6-cylinder solenoid valve or piezo injectors, proceeding injector test under different working conditions;  

2. Users can select injector cylinder for automatic measurement;
    Automatic rotation speed and steering control; 
    Automatic rail pressure adjustment:
    it can be stabilized within ±5Bar, maximum up to 2000Bar; 
    Automatic fuel measurement;
Automatic report generation after test completed.  

3. Using BOSCH, DENSO, DELPHI original test bench data, test accuracy can reach the original level;  

4. All injector drive channels have short circuit protection and open circuit tips functions. 
 
 
 
Pump Experiment 

1. Test different types of high pressure pumps including Bosch CP1/CP2/CP3, Delphi CRSP, DENSO HP3/HP4, Siemens DCP and DENSO HP0 pumps, etc.;

2. Automatic rotation speed and steering control;
   Automatic rail pressure adjustment:
  it can be stabilized within ±5Bar, maximum up to   2000Bar;
   Automatic oil measurement;
   Automatic report generation after test completed;

3. Hundreds of high pressure pump data comparison.
  
4. All high-pressure pump drive channels have short circuit protection function. 
 
5. It determines to-be-tested pump good or not by report; 
 
 
 
 
EUP EUI Experiment (Optional Module) 

1. Dozens of adapters are included in this module.
   It is designed to test hundreds of EUP and EUI including Bosch, Cummins, Volvo, CAT, Hengyang and       Witt, etc. 
 
2. Automatic rotation speed and steering control;
  Driving advance angle and working angle automatic adjustment;
   Automatic oil measurement;
   Automatic report generation after test completed;

3. Comparison of hundreds of EUP EUI experimental data.
   It determines to-be-tested EUP or EUP good or not by report;

4. Driving channel has short circuit protection function. 
 
 


Operation Interface   

1. Using Windows operation system makes operating easier; 
 
2. Real-time displaying fuel injection and fuel return quantity graph;
 
3. All working conditions automatic measurement;
 
4. Automatic report generation after test completed.
 
 
Injector Driving Characteristic Curve 

1. It is the only test system in China which is able to reach BOSCH original test bench characteristic curve standards;
 
2. Test result accuracy and test accuracy reach the original BOSCH standards; 
 
3. Able to distinguish load missing cylinder, pry cylinder or speed limited injectors. 
 
 

Our Advantages
1. We have strict test and QC system to guarantee the high quality of products.
2. Since we are original factory, very competitive factory price is provided.
3. We have 5 production lines to guarantee the delivery time.
4. Our strong R & D team ensured the newest technology products to customers and customized products available.
5. Professional & Passion sales team 24 hours at your service.
6. OEM/ODM are highly welcomed. OEM of customized products / logo / brand / packing is accepted.
7. Small quantity is accepted & quick delivery.

CCR-6800 Automatic Diagnostic common rail and EUI EUP test bench

  CCR-6800 Multifunctional Diesel Fuel Injection Pump Test Bench
Characterized with full automatic control, performs maintenance tests for Euro III, Euro IV, Euro V injectors and high-pressure pumps very conveniently. With complete standard data, it is professional for testing thousands of injectors and high-pressure pumps including Bosch, Delphi, DENSO, Siemens, Caterpillar, etc. Equipped with original imported high precision flow sensors, it has functions as automatic oil measurement, automatic generation of fuel pump nozzle test reports, etc. 
       
EUI EUP Test Module & HEUI Test Module are optional to be added onto this all-in-one test bench. 
 
 
 
Product Characteristics 

1. Automatic Control    Click "Start" after installed the to-be-test high pressure pump or injector, this test bench will automatically adjust every working conditions and proceed the maintenance tests, measure oil quantity, generate test reports, determine eligibility; 
 
2. Accurate Data    Using BOSCH, DENSO, DELPHI original standard test bench data, test accuracy can reach the original level;  

3. Automatic Calibration    When testing a new injector, test bench can automatically adjust parameters of each working conditions according to its electrical characteristics, collect and save data, generate standard data for maintenance;  

4. Multiple Protection    Over-heating, over-voltage and over-load protections, oil tank fuel shortage tips, rail pressure too high protection, automatic shutdown when operating room cover is open, six filters protection, etc.
 
 
 
Injector Experiment   

1. Equipped with Bosch original imported CP3 pump and high pressure rail with DRV, it can test 6-cylinder solenoid valve or piezo injectors, proceeding injector test under different working conditions;  

2. Users can select injector cylinder for automatic measurement;
    Automatic rotation speed and steering control; 
    Automatic rail pressure adjustment:
    it can be stabilized within ±5Bar, maximum up to 2000Bar; 
    Automatic fuel measurement;
Automatic report generation after test completed.  

3. Using BOSCH, DENSO, DELPHI original test bench data, test accuracy can reach the original level;  

4. All injector drive channels have short circuit protection and open circuit tips functions. 
 
 
 
Pump Experiment 

1. Test different types of high pressure pumps including Bosch CP1/CP2/CP3, Delphi CRSP, DENSO HP3/HP4, Siemens DCP and DENSO HP0 pumps, etc.;

2. Automatic rotation speed and steering control;
   Automatic rail pressure adjustment:
  it can be stabilized within ±5Bar, maximum up to   2000Bar;
   Automatic oil measurement;
   Automatic report generation after test completed;

3. Hundreds of high pressure pump data comparison.
  
4. All high-pressure pump drive channels have short circuit protection function. 
 
5. It determines to-be-tested pump good or not by report; 
 
 
 
 
EUP EUI Experiment (Optional Module) 

1. Dozens of adapters are included in this module.
   It is designed to test hundreds of EUP and EUI including Bosch, Cummins, Volvo, CAT, Hengyang and       Witt, etc. 
 
2. Automatic rotation speed and steering control;
  Driving advance angle and working angle automatic adjustment;
   Automatic oil measurement;
   Automatic report generation after test completed;

3. Comparison of hundreds of EUP EUI experimental data.
   It determines to-be-tested EUP or EUP good or not by report;

4. Driving channel has short circuit protection function. 
 
 


Operation Interface   

1. Using Windows operation system makes operating easier; 
 
2. Real-time displaying fuel injection and fuel return quantity graph;
 
3. All working conditions automatic measurement;
 
4. Automatic report generation after test completed.
 
 
Injector Driving Characteristic Curve 

1. It is the only test system in China which is able to reach BOSCH original test bench characteristic curve standards;
 
2. Test result accuracy and test accuracy reach the original BOSCH standards; 
 
3. Able to distinguish load missing cylinder, pry cylinder or speed limited injectors. 
 
 

Our Advantages
1. We have strict test and QC system to guarantee the high quality of products.
2. Since we are original factory, very competitive factory price is provided.
3. We have 5 production lines to guarantee the delivery time.
4. Our strong R & D team ensured the newest technology products to customers and customized products available.
5. Professional & Passion sales team 24 hours at your service.
6. OEM/ODM are highly welcomed. OEM of customized products / logo / brand / packing is accepted.
7. Small quantity is accepted & quick delivery.