Series features:
1. Small size. The 590P of the new structure is 40% smaller than the 590C
2. Multiple communication function modules are available, such as PROFIBUS, MODBUS, DEVICENET, ei-bisync, LINK, etc.
3. High resolution analog input and output points, 12bit+
4. Simple control panel, providing local/external signal mode; The native operation mode is convenient for initial use and deb ing.
5. 590P adopts the same speed feedback as 590C, speed measuring generator board/optical code board
6. The wiring method is the same as 590C; The wiring terminal on the control board is also the same as 590C
7. The appearance is the same as the continental 690P series frequency converter
8. All software forms are used to define the voltage/current of armature/magnetic field
Control circuit:
590 + all the control algorithm were made by the latest in the series of high speed 32-bit microprocessor (SCM) is complete, the structure of control software package and single chip processing speed adjustment can guarantee that all control circuit in the main circuit of silicon controlled rectifier bridge six conversion time, to ensure the sampling time of current loop is less than 3.3 mS (50 hz power supply) or 2.67 mS (60 hz power supply), speed loop algorithm also can be finished in this time, to achieve superior performance.
For reversing device, torque (current) reverse circulation time is very short (and can be set in a by the software), factory set to 1 ms, the current loop has superior performance and response to the impact load.
590 + whole digital device is an extension of thyristor trigger control circuit () patents, may obtain 210 ° phase shift control, can also apply to power the same motor armature voltage unidirectional and reversible control.
Machines provide a set of self-tuning (Self - most cerebral sci-film) algorithm, and can automatically calculate the combination machine, control unit and motor current loop of P, I constant and current discontinuous points, this function simply on the keys of operation can be obtained as a simple operation, make the system get the best dynamic performance, greatly shorten the deb ing time.
The current loop has the function of adaptation, and even when the load changes greatly, the system can get a stable speed response.
The PI parameter adjustment range of the speed loop is large, and it has the function of integral separation. The main performance is as follows:
The speed ratio is 100:1
Stabilization accuracy: the feedback of speed measuring motor is better than 0.1% optical code feedback is better than 0.01%
The 590P series has five frames/sizes:
1. "FRAME" has 15A/35A specifications and 4A magnetic field current (internal power supply)
2. "FRAME" 2 "has 40A/70A/110A/165A, 10A magnetic field power supply
3. "FRAME 3" 180A/270A shall use the original 590C base to cooperate with the new 590P control panel; Therefore, it is only to change the operating interface. Other installation/wiring, like the existing 590C, 10A magnetic field current
4. "FRAME" 4 has a magnetic field current of 380A/500A/725A/830A and 30A. 2 sets of 830A devices are combined to provide 1580A specifications
5. "FRAME H" 2200A/2700A USES the 590HD base and 60A magnetic field current
Specifications:
590P/0015/500/0011 15A 500V reversible 591P/0015/500/0011 15A 500V irreversible
590P/0035/500/0011 35A 500V reversible 591P/0035/500/0011 35A 500V irreversible
590P/0040/500/0011 40A 500V reversible 591P/0040/500/0011 40A 500V irreversible
590P/0070/500/0011 70A 500V reversible 591P/0070/500/0011 70A 500V irreversible
590P/0110/500/0011 110A 500V reversible 591P/0110/500/0011 110A 500V irreversible
590P/0165/500/0011 165A 500V reversible 591P/0165/500/0011 165A 500V irreversible
590P/0180/500/0011 180A 500V reversible 591P/0180/500/0011 180A 500V irreversible
590P/0270/500/0011 270A 500V reversible 591P/0270/500/0011 270A 500V irreversible
590P/ 0388/500/0011 380A 500V reversible 591P/0380/500/0011 380A 500V irreversible
590P/0500/500/0011 500A 500V reversible 591P/ 0500/0011 500A 500V irreversible
590P/0725/500/0011 725A 500V reversible 591P/0725/500/0011 725A 500V irreversible
590P/0830/500/0011 830A 500V reversible 591P/0830/500/0011 830A 500V irreversible
590P/1580/500/0011 1580A 500V reversible 591P/1580/500/0011 1580A 500V irreversible
590P/ 22/500/0011 2200A 500V reversible 591P/ 22/500/0011 2200A 500V irreversible
590P/ 2,700/500/0011 2700A 500V reversible 591P/ 2,700/500/0011 2700A 500V irreversible
Motor start/stop and speed control can be realized through operation panel 6901
British parker (SSD) drive system co., LTD. Is a frequency converter, dc drive and servo drive and motor industry leading technology in the field of manufacturers, in a broad range of products, reliable product quality, continuous innovation of leading technology, rich experience and global support.
Man machine page:
590 + humanized design MMI makes the operator under various conditions can be set parameters, monitoring and fault diagnosis device, all information are clearly on the two lines of backlit LCD display in English (or other languages). This MMI enables local start/stop, speed setting, and steering control to assist in setup and deb ing. The MMI can be installed on the 590+ device or on the control cabinet panel 3 meters away.
The information can be obtained and displayed through a directory menu structure without looking up the operation manual or referring to the coding table.
All functions and displays can be set and obtained by four single function keys, which can prevent operators from confusing functions and causing errors. The menu includes:
S diagnosis
Diagnosis: display speed feedback, speed deviation, current feedback, magnetic field current/voltage, analog input/output, digital input/output status, etc.
Student loan parameter setting
Parameter setting: it is used to set parameters of all functional blocks, such as feedback mode, magnetic field control mode, speed loop operation mode, etc.
Current password protection
Password protection: some important parameters can be protected by password to prevent misoperation.
S alarm
Alarm: used to display the alarm status of the current controller.
Data acquisition parameter storage
Parameter storage: save the modified parameters in the EEPROM.
S serial port
Serial port: used to set parameters related to communication, such as serial port, baud rate, controller address, etc.
Experimental system configuration
System configuration: used to configure analog input/output, digital input/output, etc.
Magnetic field control:
590+ provides a thyristor controlled voltage regulator as the excitation control of the motor. The excitation control mode can be constant voltage control, constant current control and automatic weak magnetic speed (constant power) control. Weak magnetic control can correspond motor speed, motor current turning point and magnetic field intensity.
Advanced shell structure quality meets international standards:
According to the different output current (15A~2700A), the device has 6 sizes of housing with different ventilation devices (see table 1) to provide the most space per kilowatt saved. The reversible and irreversible device USES a shell and features:
All connections (wires or fiber optics) connected to the device are made of plug connectors, which are easy to install.
All the boards are the same, using plug - in replacement.
The controllers meet UL, CSA or EMC standards, and mechanical manufacturers can safely ship 590+ overseas for installation.
Eurotherm Drives is operated and managed in accordance with BS5750, part1/1987h and iso9001-1987 quality management system.
Price list of PARKER PARKER 590 series controllers 2016
Model price model price model price model price
591C/35A 17600 590C/35A 18500 512C/8A 3930
591C/70A 17970 590C/70A 19160 512C/16A 4400
591C/110A 19000 590C/110A 21000 512C/32A 4770
591C/150A 19950 590C/150A 22400 512C/8A 7540
591C/180A 23000 590C/180A 25600 512C/16A 8320
591C/270A 27600 590C/270A 33700 512C/32A 8600
591P/380A 41300 590P/380A 47000 590C panel 8760
591P/500A 43000 590P/500A 50000 590C power panel 8300
591P/725A 50000 590P/725A 62000 590P control panel 8300
591P/830A 58000 590P/830A 72000 590P power panel 8350
15 a 591 p / 590 p / 591 15 16450 a
591P/35A 16430 590P/35A 17450 RKC temperature control meter RS400
RKC temperature control meter RH400, 591P/40A 17300 590P/40A 18580
591P/70A 17800 590P/70A 19180 RKC temperature control meter CH402
591P/110A 18980 590P/110A 20810 RKC temperature control table CD901
591P/165A 19900 590P/165A 22290 RKC temperature control meter FB900
591 p / 591 a, 22470, 590 p / 180 a, 25100
591 p / 591 a, 27150, 590 p / 270 a, 34200
Parker dc governor
