Home > Products > Consumer Electronics & Lighting > Lighting > LED Lighting

Product parameters:
Model:  HLT- -Z600W
output: 100-240V  50/60Hz
Input current: 6.0A (max)
Input power: PF>0.99
Environment temperature: Ta=40℃/104F
Surface temperature: Tc=60℃/140F
Output voltage: 100V
Output current: 6.6A(max)
Output frequency: 65-142kHz

Certifications: CE, FCC, RoHS Directive-compliant

Packing including:
1 piece LED grow light
1 piece power cord
1 piece free hanger kit
1 piece user’s manual

Lamp connections
1.Never turn on the ballast without the lamp cord and lamp installed
2.Never disconnect the lamp from a live ballast
3.The ballast does not  light on, lights flash and so on, you must disconnect the ballast’s input power then do the next thing
4. Hot‐restrike: it is very important to allow your lamp to cool before attempting to reignite. It is recommended to allow 20‐30
 minutes before restarting to avoid damage to the lamp
5. Ensure a snug fit when installing lamps
6.Make sure the mogul socket shows no signs of damage or corrosion
7. Confirm that power has been disconnected from the ballast before attempting to change lamps
Attention:
.Do not use the lights in dripping water or anywhere where they will get wet, water and electricity can be a dangerous mixture
.Light is strong and the eyes are protected
.To protect the light, cut off the power when there is a lightning  strike