6 Kinds Mould In One Machine Soft Forming Edge Bander Machine,SH372SE
Product Description
| 6 Kinds Mould In One Machine Soft Forming Edge Bander Machine |
| Advantages |
| The bed is welded with high-strength structural steel plates, which has high strength and stability. The surface has been treated with anti-rust treatment and electrostatic sprayed. |
| 1. One machine can seal six shapes of plates, J-type, C-type, front J, middle J, back J, and straight line. |
| 2. Touch screen control, electric adjustment of pressure beam lifting and automatic feeding. |
| 3. The milling machine is composed of seven groups of motors, each equipped with different milling tools. The tools cannot be replaced at will during use. |
| 4. Glue pot-type gluing system: EVA glue can be directly poured; |
5. The 25 sets of pressure stickers are independently controlled by cylinders, which can be switched with one button on the touch screen. The pressure can be adjusted individually and controlled by the position of the plate.
Baking lamp heating (5 groups in total) greatly increases the degree of pasting and pressing of the edge banding, making the edge banding more beautiful and firm. Bearing-type pressing is not easy to scratch the edge banding strip |
| 6. Automatically spray glue remover and 7 glue removers, making it difficult to stick and keep the machine clean and tidy. |
| 7.Blow air in 6 places to blow off excess debris. Automatically start and finish. |
| 8. Three sets of trimming assemblies, (upright rough trimming → upper rough trimming, lower fine trimming → upper fine trimming) |
| 9. Arc scraping, flexible scraping and polishing. |
| Model |
SH372SE |
| Power supply voltage |
380v/three-phase four-wire 50hz |
| Total power |
45kw |
| Air pressure |
0.6-0.8Mpa |
| Capacity of glue pot |
2600ml |
| Temperature of glue pot |
110-210 |
| Hot melt glue type |
PUR/EVA |
| Width of sealing strip |
J 55mm C35mm |
| Thickness of sealing strip |
0.52-0.56mm |
| Board thickness |
18mm |
| Minimum board size |
25*15cm |
| Feeding speed |
12/8/5 m/min |
| Volume of gas tank |
5 liters |
| External dust suction port |
φ150mm*5 |
| Edge sealing material type |
PVC Matte surface is recommended |
| Package size |
860*125*208cm |
| Packing method |
iron pallet + wrapping film |
| Gross weight |
3570kg |
| |
|
| |
|
| Look Machine Video,click the Youtube website: |
| https://youtu.be/L6VEgYEC_u0 |
|
Product Image
Img 1
Img 2
Img 3
Img 4
Img 5
Img 6
Img 7
Img 8
Img 9
Img 10
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
