Home > Products > Electronics & Electricity > Electronic Components > Terminal

Car battery BMS test wiring harness

Rated voltage: 250 v DC - AC (RMS)

Current rating: 5.0 A

Pressure value: 250 v

Working temperature: 25 ℃ ~ + 85 ℃

Insulation resistance: 1000 m Ω

Contact resistance: 20 m Ω

Wire technology parameters

Current rating: 5.0 A

Rated voltage: 300 v DC - AC (RMS)

Rated temperature: 80 ℃

Connector:

1. The plastic shell with nylon 66 flame retardant polyamide resin

2. The terminals used C5191 phosphor bronze plate, the surface tin plating

3. The plastic shell has good heat resistance, low friction coefficient, good wear resistance, terminal has good elasticity, not easy oxidation, good electrical conductivity properties

4. Adopt domestic famous brand air head, the material performance is good.

Wire:

1, use the winding conductor 20 to 24 awg bare copper or tin plated copper

2, insulators, heat-resisting PVC insulated UL1007PVC wire

3, acid and alkali resistance, oil resistance, moisture proof, mould proof, such as convenient peel and cut

4, combustion test: by UL and CSA FT1 VW - 1, vertical flame test