Home > Products > Industrial Supplies > Machinery > Welding Machinery

Description

Welded Gabion is made of welded wire mesh panels assembled with spirals, locking pins and stiffener. Each gabion panel is composed of r ed high tensile wire coated by a thick, corrosion-resistant layer of zinc.

The wire is also available with a tough, durable pvc coating. Welded gabion could be used for prefilled on site construction which is quick and easy. They have a variety of applications such as retaining walls for commercial, industrial and road project, landscaping, erosion control.

 

Advantage:

• Easy to install
• High zinc coating thus anti-rust and anit-corrosive
• Low cost
• High security
• Colorful stones and shells etc can be used with gabion mesh to make beautiful appearance
• Can be made into various shapes for decoration

How to install welded Welded Gabion?

• Step 1. Ends, diaphragms, front and back panels are placed upright on the bottom section of wire mesh.
• Step 2. Secure panels by screwing spiral binders through the mesh openings in adjacent panels.
• Step 3. Stiffeners shall be placed across the corners, at 300mm from the corner. Providing a diagonal bracing, and crimped over the line and cross wires on the front and side faces. None are needed in interior cells.
• Step 4. Welded gabion box filled with graded stone by hand or with a shovel.
• Step 5. After filling, close the lid and secure with spiral binders at the diaphragms, ends, front and back.
• Step 6. When stacking tiers of the welded gabion box, the lid of the lower tier may serve as the base of the up
•