Home > Products > Electronics & Electricity > Transducer

                   Figaro TGS2611-E00 methane Gas Sensor module FSM-T-01 

Advantages

1 Gas concentration is digitally and quantitively output by means of communications

2 Alarm output can be set through programming

3 Factory calibrated, temperature compensated

4 Compact size, low cost

5  RS485 digital signal output gas concentration

6 Can be programmed to set alarm point output

 7 Eliminate the interference of alcohol and other VOC gases

Applications

1 Front-end solution for methane gas alarm

2 Simple methane gas alarm output

3 IoT

Specfication 

The FSM-T-01 module is designed with two different interfaces considering the convenience for use.

TTL level’s asynchronous communication interface allows the user to read real time gas concentrations with

very simple commands;also different alarm thresholds can be set through communication programming.

When the gas concentration reaches set value alarm output signal would be generated automatically from the alarm terminal. Besides , this compact sized module applies a socket type design which facilitates regular replacements of

the sensors.

For some main board, different modules can also be replaced simply by pl ing and pulling

out, fulfilling the functions of detection and alarming for methane and other gases