|Origin:||Made In China|
|Category:||Industrial Supplies / Machine Hardware / Valves|
|Label:||PlastIc float valve , Valve , Check valve|
|Min. Order:||10 pc|
More pictures about Plastic Float Valve
Other float valve you may be like
|Mode||1/2" plastic float valve DN15EX|
|Body Material||ABS(Acrylonitrile Butadiene Styrene plastic)|
|Float Ball Material||PE(Polyethylene)|
|Seals Material||SR(Silicon Rubber)|
|Working Pressure||0.01- 1.2Mpa(0.1Mpa=1Bar=14.5Psi)|
The actual application depends on the specific circumstances.
DN15EX plastic float valve can be installed in the water tank, humidifier, evaporative cooler, incubator, gardening, livestock, etc.
Loose the screw on the arm to adjust the float position and achieve the horizontal and vertical installation. Each of install method will not affect the performance.
1.If the body and pipe joint leak water, please check water tape is wrapped and the pipe joint is tighted.
2.The Strength should suitable when tight and fix the float valve, too much excessive strength will damage the valve.
3.Please check the water inlet filter regularly and remove the garbage out in time.
4.Please do not use the cleanser which will cause damage when clean the float valve.
We have specialized in plastic float valve over 15 years, have getted a lot of international partners attention and favor for many years. With the competitive price, stable quality and best service, we have built a good relationship with the customer all over the world.
For years many novel, suitable and long life float valves have been developed to meet the needs of market, now more than 10 patents have got the authorization. The sealability and body strength(premium grade) of our float valve have passed the inspection of the Quality Inspection Bureau.
|Payment Terms:||Paypal/TT / LC / DP / DA|