Model: | - |
---|---|
Brand: | - |
Origin: | - |
Category: | Metallurgy , Mining & Energy / Metallurgy & Mining / Bars, Rods, Angles, and Stainless Steel Shapes |
Label: | - |
Price: |
-
|
Min. Order: | - |
Live Chat: | Last Online:24 May, 2017 |
St35 Hydraulic Cylinder Steel Tube hign precision honing pipe and skiving pipe
Delivery Condition |
Cold Finished (BK) |
Stress relieved (BKS) |
|||
Rm |
Elongation |
Rm |
ReH |
Elongation |
|
MPA |
% |
MPA |
MPA |
% |
|
St 35 |
≥480 |
≥6 |
420 |
315 |
14 |
Description | DIN 2391 St 35 Honed Tube | ||
Supply Capacity | 10000 tons/year | ||
Process Method | cold drawn or cold rolled | ||
Out Diameter | 30-450mm | ||
Wall Thickness | 2-40mm | ||
Length | SPECIFIC OR AT RANDOM as required | ||
Standards | EN 10305, DIN 2391, JIS G3445 | ||
Packing | 1.with plastic cap to protect both ends
2.plastic bag wrapped outside the pipe 3.bundles to be covered by polythene & strapped securely . |
||
Certificate | ISO CE SGS | ||
Delivery time | Shipped in 35 days after payment | ||
Trade Term | FOB CFR CIF |
Designation |
Symbol |
Description |
Cold finished/ hard |
BK |
Tubes do not undergo heat treatment following the final cold forming and thus have a rather high resistance to deformation |
Cold finished/ soft |
BKW |
The final heat treatment is followed by cold drawing involving limited deformation. Appropriate further processing allows a certain degree of cold forming |
Cold finished and stress relieved |
BKS |
Heat treatment is applied following the last cold forming process. Subject to appropriate processing conditions, the increase in the residual stresses involved enables both forming and machining to a certain degree |
Annealed |
GBK |
The last cold forming process is followed by anneling above the upper transformation point in a controlled atmosphere |
Normalized |
NBK |
The last cold forming process is followed by annealing above the upper transformation point in a controlled atmosphere. |
Chemical Composition(%):
Grade | C | Si | Mn | P | S |
St35 | 0.17max | 0.35max | 0.40min | 0.025max | 0.025max |
Tag: