Home > Products > Electronics & Electricity > Telecommunication & Broadcasting > Network Communications Equipment

his series product is IEEE802.3 Ethernet media converter. Can achieve 2 10/100/1000 Base-T twisted-pair and 1000 Base-X media conversion or extension of the network transmission distance. Mainly used in optical fiber network (20/40/60/80/120km) over a long distance transmission. Fully supports 10/100/1000M or 10M, 100M, 1000M transmission rate. Optical and electrical ports can operate at 10M, 100M or 1000M transmission rate application. The device provides 2 UTP port and 8 1000Base-X ports, The equipment consists of link type/loop network, Easy to save fiber resources.

Features

●Automatically adapt to the 10Mbps, 100Mbps and the 1000Mbps environment, convenient for network upgrade;

●The device provides 2 copper ports, 8 gigabit optical ports;

●Ethernet port priority settings;

●Support half-duplex and full-duplex communication network, with automatic negotiation ability;;

●Support transmission long VLAN packets, and can support IEEE802.10 protocol

switch products matching use, support a maximum of 1916 bytes of the Ethernet packet;

●Support twisted port cross connect switch selection, Facilitate system deb ing and installation;

●Low-power consumption, low fever, able to long time stability work;

●Selection of a single and double core optical fiber, expanded needs of users;

●Ethernet port supports AUTO-MDIX (cross line and straight line adaptive);

●Ethernet monitoring automatic reset function, not crash;

●Be able to detect when the optical signal is lost for the end of the device is powered down or fiber barrier, and through the indicator alarm;

●In this side view with remote device working status display function;

●No relay transmission distance up to 2~120 kilometers;

●Multiple power mode options: AC220V, DC +5 V;

●Support desktop, wall hanging;

Technical specifications

●Optical Interface

Wavelength: Single mode 1310nm/1550nm;

           Multi-mode 850nm/1310nm (optional, when ordering should request)

Fiber Count:  Send and receive via duplex, send and receive a simplex (optional, when ordering should request)

Transmission power:  -9dBm∽-5dBm

Transmission distance:  Single mode 20km,40km,60km,80km,100km,120km

                       Multi-mode 550m

Receive Sensitivity:  Better than-36dBm (BER<10-11)

Connector: SC/FC/ST/LC (optional, when ordering should request)

●Ethernet interface: (10/100/1000M)

Rate: 10/100/1000M adaptive, full / half duplex full adaptive

Protocol: Supports IEEE 802.3 and IEEE 802.1 Q (VLAN)

Backplane bandwidth: 20Gbps

MAC address table: Can learn 4096 MAC addresses

Physical Interface: RJ45, Auto-MDIX (adaptive crossover / straight line)

Connector: RJ45

●Power requirements:

System Power: AC180V ~ 260V;   DC+5V;

Power dissipation: ≤5W

●Size

Desktop:  215 (L) x135 (W) x 30mm (H)

Housing: IP30 protection grade, fanless design

●Work Environment

Operating Temperature: -10℃~~50℃

Operating Humidity: 5%~95%(No condensation)

Storage Temperature: -40℃∽80℃

Storage humidity: 5%∽95%(No condensation)

●LED

Package

• 8x100/1000-SFP+2x10/100/1000T Fiber Ethernet switch
• DC 5V/3A power adaptor
• Product manual
• Warranty card