Home > Products > Computers & AV Digital > AV Equipment > AV Peripheral

DVI 1x8

SPLITTER

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.

The products are designed to make your A/V device use more convenient, comfortable, productive and cost-efficient.

The DVI splitter can allow multiple video display units connected to one DVI Source and display the same HD picture at the same time. So that you can share one signal source, greatly reduce the cost of system.

Our devices offer solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.

INTRODUCTION

FEATURES：

• 1x DVI input and 8xDVI output
• Support resolution:up to 4096x2160@30Hz
• Support for long distance signal transmission
• Installs in minutes, No loss of quality
• Supports wide range voltage DC input (DC12V)

PACKAGE CONTENTS:

1. Main unit             1pcs

2. AC power adapter      1pcs

3. User manual          1pcs

FEATURES OF THE INTERFACE:

DC12V: DC input

IN: DVI-D input port

OUT 1-8: DVI-D output port  

ON/OFF: Power Switch                             

NOTE : EDID MODE: After the splitter is powered on, and then there is a display machine connected to the OUT1, the splitter will get the EDID of display machine connected OUT 1. If there is no any display machine connected to output1, the machine will use default EDID output.

Power: Power LED

Signal: Signal LED

1 - 8: OUT LED

OPERATIONG AND CONNECTION:

1. Connect one single link DVI-D cable from a DVI signal source into the input port of splitter.
2. Connect single link DVI-D cables from TV/Monitor into the DVI output ports of splitter.
3. If the resolution is higher than 1920X1080@60Hz, you must use a DVI-D cables, the signal source and the display must be able to support this resolution.
4. Connect DC plug of AC adapter to DC jack and inserted into the power socket.

SPECIFICATIONS:                                    

DVI interface type …………………………..............................................DVI-D 29-pin, female

Single link input/output resolution …………………………..................up to 4096x2160@30Hz

Max signal bandwidth………………….………………………………………………..340MHz

Max baud rate…………………….………………………….………………3.4Gbps Serial Link

Input/Output TMDS signal ………….……………………….…..……….0.5~1.5Volts p-p(TTL)

Input/Output DDC signal …………………………..……….…………………. 5Volts p-p (TTL) 

Max working current ……………………………….……………………...... …………1A/12V

Power adapter ………………………………………AC 100V～240V 50HZ/60Hz, DC12V/2A

Operating Temperature range …………..……………………………………………. -5 to +45℃

Storage Temperature range…………………………………………………………. -15 to +55℃

Operating Humidity range ………………….……….…..…….10 to 90%RH (No Condensation)

Storage Humidity range………………………….………………5 to 95%RH (No Condensation)

Notes:

Pls use the machine as the instruction listed to keep the long use lifetime of the machine.

1. The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment.
2. All parts will be free from the strong shake, hit, fall.
3. Touching the power adaptor with the wet hands is prohibited.
4. Pls hold the power adaptor head and do not pull the power cord when cut off from the socket.
5. Pls turn the power off when the machines not used for long time.
6. Pls do not open the cover and do not touch the inside parts.
7. Pls use the original factory power adaptor.

FAQ:

Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below: